An eight‐shot pneumatic pellet injection system has been developed for plasma fueling of the tokamak fusion test reactor (TFTR). The active cryogenic mechanisms consist of a solid hydrogen extruder and a rotating pellet wheel that are cooled by flowing liquid‐helium refrigerant. The extruder provides solid hydrogen for stepwise loading of eight holes located circumferentially around the pellet wheel. This design allows for three different pellet diameters: 3.0 mm (three pellets), 3.5 mm (three pellets), and 4.0 mm (two pellets) in the present configuration. Each of the eight pellets can be shot independently. Deuterium pellets are accelerated in 1.0‐m‐long gun barrels with compressed hydrogen gas (at pressures from 70 to 105 bar) to velocities in the range 1.0–1.5 km/s. The pellets are transported to the plasma in an injection line that incorporates two stages of guide tubes with intermediate vacuum pumping stations. A remote, stand‐alone control and data‐acquisition system is used for injector and vacuum system operation. The eight‐shot injection system has been installed and operated on TFTR. The design features, operation, and performance characteristics of the system are described.