Two methods of cancelling the surface reflections of dielectric lenses are described in this paper. The first utilizes a simulated quarter‐wave matching layer, and the second a reactive wall embedded within the dielectric. The reactive wall may take a variety of physical forms, such as arrays of thin conducting disks which have a capacitive reactance, or arrays of thin wires which have an inductive reactance. Surface matching is obtained when the disks are placed approximately ⅜ wavelength inside the lens, or the wires ⅛ wavelength. Curves are presented that show how the reflections at the air and dielectric boundary are reduced for various angles of incidence and polarization when quarter‐wave layer and reactive‐wall matching are employed.The reactance of the array of disks for waves incident at various angles and polarizations is computed by means of Bethe's small aperture theory, and Babinet's principle. Measurements in wave guide of the reactance of an array of circular disks for various angles of incidence and for bothE‐ andH‐plane polarization show close agreement with the theory.