Mechanical Properties of Acacia and Eucalyptus Wood Chars
作者:
M. Kumar, B. B. Verma, R. C. Gupta,
期刊:
Energy Sources
(Taylor Available online 1999)
卷期:
Volume 21,
issue 8
页码: 675-685
ISSN:0090-8312
年代: 1999
DOI:10.1080/00908319950014425
出版商: Informa UK Ltd
关键词: Carbonization;Mechanical Properties;Wood
数据来源: Taylor
摘要:
In the present investigation the effects of carbonization conditions (temperature and heating rate) on the mechanical properties (such as crushing and impact strengths and shatter index) of acacia and eucalyptus wood chars have been determined. The crushing and impact strengths of both the acacia and eucalyptus wood chars (made by slow carbonization) decreased with increase of preparation temperature up to 600 degrees C, followed by an increase thereafter. These wood chars showed a continuous increase in shatter index values with carbonization temperature. In contrast to slow carbonization (heating rate 4 degrees C min -1), rapid carbonization (heating rate 30 degrees C min -1) yielded chars of lower crushing strengths. Slowly carbonized eucalyptus wood gave chars of superior crushing and impact strengths than those produced from acacia wood under the same carbonization conditions. The crushing and impact strengths of these wood chars, in general, have shown an increase with increase in their apparent density. The crushing strength of cubic-shaped wood char decreased with increase in size.
点击下载:
PDF (411KB)
返 回