The uplift behavior of grouted rock anchors is little known despite their increasing use within the last few years and during which their field of application has been greatly broadened. The behavior of anchors is usually controlled at great cost after installation through field tests. Generally, their design is based on experience and an engineer with lesser experience finds it extremely difficult to design one. Furthermore, present methods for dimensioning anchors generally result in oversizing the anchors' grouted length without a corresponding improvement in the safety factor. To provide a more fundamental approach to designing grouted rock anchors, a finite element analysis of the uplift behavior has been carried out. The results of the analysis using isoparametric quadrilateral elements with eight nodes are presented in this article. Results of failure loads and modes obtained from anchors installed in the field are well predicted by the model.Key words: rock mass, grouted anchor, cement grout, finite elements, uplift of an anchor.