An electrical-conducting polypropylene/polypyrrole (PP/PPy) composite was prepared by the chemically oxidative modification reaction of pyrrole on the surface of PP particles in suspension. Another type of PP/PPy composite was prepared by mixing the coated PP particles with noncoated PP particles at room temperature. The composites were processed by compression molding or by injection molding. The injection-molded composites exhibited better mechanical properties compared to compression-molded samples, while these composites showed better antistatic behavior and electrical conductivity. The differences in the behavior of the two types of composites were caused by the different structure of the PPy phase, which was studied by hot-stage optical microscopy and X-ray photoelectron spectroscopy (XPS).