Extrusion of vapour deposited Al–7·5Cr–1·2Fe (wt-%) alloy (RAE Alloy 72)
作者:
GardinerR. W.,
BishopA. W.,
GilmoreC. J.,
期刊:
Materials Science and Technology
(Taylor Available online 1991)
卷期:
Volume 7,
issue 5
页码: 410-418
ISSN:0267-0836
年代: 1991
DOI:10.1179/mst.1991.7.5.410
出版商: Taylor&Francis
数据来源: Taylor
摘要:
AbstractTechniques and equipment were developed for the extrusion of vapour deposited RAE Alloy 72. The alloy was extruded at temperatures from 300 to 420°C and extrusion ratios from 2:1 to 25:1. Room and elevated temperature strengths and smooth S–N (stress–number of cycles to failure) fatigue properties were determined for a range of extrusions. The best extrusions gave room and elevated temperature strengths that were comparable to those of rapidly solidified aluminium alloys. The fatigue strength/tensile strength ratio of>0·5 was higher than would be expected for an aluminium alloy.MST/1350
点击下载:
PDF (2378KB)
返 回