The conditions and the physico-chemical processes occurring in the ISP furnace cause the possibility of partial reoxidation of vapourized zinc escaping from the furnace counter-current to the batch material. In order to determine the reoxidation degree and localize the active zone the radiotracer method was applied. The method of solving the convolution integral was used. The experimental part resulted indetermination of impulse characteristics of the zinc condenser; in the next step, the curves of zinc concentration distribution at the ISP furnace outlet were found on the way of calculations. The65Zn isotope was used as the tracer for the industrial experiments. About 25–30% of total amount of zinc obtained as a result of zinc oxides reduction processes undergoes reoxidation in the surface layer of the bath in the furnace shaft. The method of tracer preparation for investigating the behaviour of zinc occurring in the form of silicates and ferrates in the shaft has been proposed.