AbstractCopolymers of vinylidene fluoride and trifluroethylene are presently being considered for many piezoelectric applications. In contrast to the poly(vinylidene fluoride) homopolymer, a transition from the room temperature ferroelectric phase to a paraelectric phase has been observed in these copolymers. The temperature of this transition was determined by measuring the position of the endothermic peak observed in the differential scanning calorimeter. The rate of cooling from the paraelectric to ferroelectric phase was found to affect the temperature at which the transition occurred on subsequent heating. Changing the conditions under which molten polymer initially crystallized into the paraelectric phase had an even greater effect on the resultant transition temperature. In addition to the DSC studies, wide‐angle x‐ray measurements were performed on samples subjected to different thermal treatments. No significant differences were found in the x‐ray scans of these copol