AbstractThe tribological behaviour of multilayered coatings deposited on plain carbon steel was investigated by microscale abrasion tests (MSATs). The multilayered coatings consisted of an outer diamond‐like carbon (DLC) layer, a physical vapour deposition (PVD) nitride‐based interlayer, and an inner electroless Ni‐P layer. PVD TiN‐ and Ti(C,N)‐coated samples with and without the DLC outer layer were studied in order to evaluate the influence of each layer on the tribological behaviour of the multilayer‐coated system.The MSATs were carried out using a device based on ball‐cratering geometry: a hard steel sphere was rotated against the coated specimen in the presence of an aqueous suspension of SiC particles. The wear coefficients of the multilayers were calculated from the diameter of the wear craters. The morphology of the wear scars produced by the MSATs was studied by atomic force microscopy (AFM). The wear damage was described by measuring the r.m.s. roughness (Sq) on the sides of the wear craters. Roughness values were related to the wear coefficients (kc) for the different multilayers on the basis of mathematical elaboration typical of the ‘design of experiment’ (DOE) statistical technique. The presence of the DLC outer layer reduced the roughness of the crater sides and significantly increased the wear resistance of the multilayer only in the case of the