A dual sensor Wiener filter (DSWF) technique was used to improve the image quality of a scanning type digital radiographic system. In a digital radiographic system, image quality is evaluated by resolution and SNR (signal‐to‐noise ratio), which are two important parameters representing the objective performance of the system. In this method, when two images are acquired in the same region using two sensors with different characteristics of resolution and SNR, they are processed simultaneously using DSWF, which is the extended concept of a Wiener filter to two dimensions. DSWF uses the cross power spectrum between dual sensor outputs of the same chest radiographic image in the design of filter parameters. It has been implemented with fast algorithm using FFT (fast Fourier transform). The performance of the proposed method is compared with that of conventional methods (Wiener filter and parametric projection filter). In simulation studies, it is shown in 12 cases that this new method has SNR improvement of 1–2 dB better than conventional methods.