AbstractThe Pelton DRTMServovalve Enhancement causes the natural output of a vibrator to resemble the desired output more closely. This simplifies the control problem and reduces harmonic distortion.The traditional type of servovalve used on seismic vibrators is a flow‐control servovalve. Flow is proportional to a vibrator's baseplate velocity, with respect to its reaction mass.The new servovalve control parameter is pressure rather than flow. The differential pressure applied to a vibrator's actuator piston, multiplied by the area of the piston, equals the force applied to the vibrator's baseplate structure. This may be defined as actuator force. There is a simpler and more linear relationship between actuator force and ground force than between actuator velocity and ground force. Thus, it is better for the servovalve to control pressure into the actuator rather than flow.A flow‐control servovalve can be made to control pressure by sensing the differential pressure across a vibrator's actuator piston and applying it as a negative feedback around the servovalve main stage. This has been carried out and tested. The result is more accurate vibrator control and reduced harmonic distort