ABSTRACTA contribution is given to the solution of the problem of filtering noise‐degraded Schlumberger sounding curves. It is shown that the transformation to the pole‐pole system is actually a smoothing operation that filters high‐frequency noise. In the case of residual noise contamination in the transformed pole‐pole curve, it is demonstrated that a subsequent application of a conventional rectangular low‐pass filter, with cut‐off frequency not less than the right‐hand frequency limit of the main message pass‐band, may satisfactorily solve the problem by leaving a pole‐pole curve available for interpretation. An attempt is also made to understand the essential peculiarities of the pole‐pole system as far as penetration depth, resolving power and selectivity