ABSTRACTSoy dough (defatted soy flakes), at 120° C and 30% moisture, was extruded through a series of dies of differing length (L) and radius (R). Rlots of pressure (P) were linear with the length to radius ratios (L/R) of the dies at constant output rate (Q) and R. The intercepts of the P versus (L/R) plots on the P = O axis give the end corrections (e) for capillary flow at each output rate. For soy dough, these end corrections were surprisingly large at low output rates and generally decreased rapidly with increasing output rate. This is contrary to the normal behavior of viscoelastic fluids, such as thermoplastics, where the end correction increases with increasing output rate. Both the end correction, which is a measure of the elastic properties of the soy dough, and the viscosity of the soy dough depended on the output rate as expected and also on the retention time of the material in the system