Synthesis of nitrogen ceramic povvders by carbothermal reduction and nitridation Part 3 Aluminium nitride
作者:
ChoY. W.,
CharlesJ. A.,
期刊:
Materials Science and Technology
(Taylor Available online 1991)
卷期:
Volume 7,
issue 6
页码: 495-504
ISSN:0267-0836
年代: 1991
DOI:10.1179/mst.1991.7.6.495
出版商: Taylor&Francis
数据来源: Taylor
摘要:
AbstractIt has been found that the reaction rate between alumina and carbon in nitrogen can be considerably increased by using Al(OH)3–C mixtures instead ofαAl2O3–C mixtures. The C/Al(OH)3ratio in the starting mixtures should be greater than the stoichiometric ratio to complete the reaction. It was observed that alumina is reduced and nitrided to form aluminium nitride via spinel type aluminium oxynitride which is an intermediate compound. The overall reaction rate increased with decreasing Al(OH)3particle size and increasing nitrogen flowrate. It is thought that the faster reaction rates obtained from Al(OH)3–C mixtures were derivedfrom the high specific surface area of transition aluminas, such asγAl2O3, which formed during heating of the samples to the reaction temperature. The particle morphologies of the Al(OH)3powders did not change during the reduction and nitridation reaction, an important attribute to the process.MST/1346c
点击下载:
PDF (3465KB)
返 回