An oil-in-water emulsion in the inlet zone of a concentrated contact is modeled by treating the oil particles as flattened cylinders surrounded by water. In an independent flow model, the oil and water flows are coupled only through the pressure gradient. However, the model leads to anomalous behavior with regard to the flow of water. To overcome this problem, corrections to the pressure gradients due to interactions between the oil and water were derived. Both models showed that the emulsion became concentrated because the higher viscosity oil was preferentially drawn into the conjunction. The net effect was similar to an inlet starved of oil. The inlet film thickness predicted by the interactive theory was in good agreement with Dow's experimental measurements for an EHL contact.Presented at the 48th Annual Meeting in Calgary, Alberta, Canada May 17–20, 1993