AbstractA review is given of recent results obtained for discontinuously reinforced intermetallic matrix composites produced using the XD process. Intermetallic matrixes investigated include NiAl, multiphase NiAl+Ni2AlTi, CoAl, nearγtitanium aluminides (i.e. TiAl+Ti3Al), and L12trialuminides containing minor amounts of second phase. A judicious match of the matrix and reinforcement can enhance both physical and mechanical properties. Particulate reinforcements can affect properties directly by enhancing modulus and strength or indirectly by refining grain size, enhancing microstructural homogeneity in a casting, or providing additional nucleation sites which improve phase transformation kinetics. Such mechanical properties as low and high temperature strength, compressive and tensile creep, elastic modulus, ambient ductility, and fracture toughness are discussed as functions of reinforcement size, shape, and volume fraction. Microstructures before and after deformation are examined and correlated with measured properties. An observation of interest in many of the systems examined is‘dispersion weakening’at high temperatures and high strain rates. This behaviour is not specific to the XD process; rather similar observations have been reported in other discontinuous composites. Proposed mechanisms for this behaviour are presented.MST/1561