ABSTRACTThe distribution of fracture permeability in granitic rocks was investigated by measuring the distribution of vertical flow in boreholes during periods of steady pumping. Pumping tests were conducted at two sites chosen to provide examples of moderately fractured rocks near Mirror Lake, New Hampshire and intensely fractured rocks near Oracle, Arizona. A sensitive heat‐pulse flowmeter was used for accurate measurements of vertical flow as low as 0.2 liter per minute. Although boreholes were spaced at intervals ranging from 10 to 50 meters, acoustic televiewer logs showed little direct continuity of individual fractures from borehole to borehole in either the moderately fractured rocks or intensely fractured rocks. Results indicated that nearly all inflow and outflow to boreholes occurred by means of one or two discrete fractures in both cases. These fractures did not appear very different from other prominent fractures indicated on televiewer and resistivity logs for these boreholes. Hydraulic connections between boreholes apparently were composed of conduits formed by the most permeable portions of intersecting fractures. Most flow in the moderately fractured rocks occurred at isolated fractures at a depth of about 45 meters indicating a nearly horizontal zone of fracture permeability composed of orthogonal, steeply dipping fractures. Previous studies have identified a zone of horizontal permeability in the lower part of the boreholes in the intensely fractured rocks, but flowmeter tests indicated that flow also entered and exited individual boreholes by means of one or two steeply dipping fractures. These results indicate zones of fracture permeability in crystalline rocks are composed of irregular conduits that cannot be approximated by planar fractures of uniform aperture, and that the orientation of permeability zones may be unrelated to the orientation of individual fractures within those zone