Two methods of determining the variation of real and complex modulus with frequency from vibrating reed test results are detailed. One is based on measurements of the relative amplitude and phase lag of the motion of the free and driven ends of the reed, the other on amplitude resonance measurements only. The analysis is based on a general linear viscoelastic law, and takes into account the influence of the frequency dependent moduli of the material on the frequency and amplitude of the resonance peaks. This influence has not been correctly accounted for in previous analyses which have included the assumption that the material behaves according to a particular, simple viscoelastic law, which will in general not be borne out by the final results.The method is applied to a series of tests. For the material and frequency range used the imaginary part of the complex modulus was small compared with the real part, and the influence mentioned in the foregoing was small. A simpler method of analysis might thus be justified, but in other cases it will be necessary to carry out the complete analysis in order to obtain a satisfactory interpretation of test results.