|
11. |
Microstructural simulation of nickel base alloy Incone* 718 in production of turbine discs |
|
Materials Science and Technology,
Volume 12,
Issue 11,
1996,
Page 963-969
BrandA. J.,
KarhausenK.,
KoppR.,
Preview
|
PDF (2187KB)
|
|
摘要:
AbstractModelling and simulation of microstructural development is of increasing interest especially for the production of critical components for aeronautical applications such as turbine discs. In this paper a model is presented which can predict microstructural changes of nickel base Inconel 718 during hot forming by means of semi-empirical equations. To determine the necessary parameters for reliable prediction, hot compression tests were carried out in a temperature range of 950 to 1150°C for strain rates of 0·005 to 10 s−1. The measured data and the derived characteristic equations for the description of the hot deformation behaviour were incorporated into a finite element program and two industrial forging strategies for the production of turbine discs were simulated. The finite element program used was extended by a module to take the velocity characteristics of a counterblow hammer into account. Thus, a prediction of grain size evolution and recrystallised volume fraction during industrial hot working was facilitated which can be utilised for the planning of forging operations with respect to achieving the desired material properties.MST/3362
ISSN:0267-0836
DOI:10.1179/mst.1996.12.11.963
出版商:Taylor&Francis
年代:1996
数据来源: Taylor
|
12. |
Welding of rapidly solidified Alloy 8009 (Al–8·5Fe–1·7Si–1·3V): preliminary study |
|
Materials Science and Technology,
Volume 12,
Issue 11,
1996,
Page 970-977
EllisM. B. D.,
StrangwoodM.,
Preview
|
PDF (4320KB)
|
|
摘要:
AbstractAlloy 8009 is a rapidly solidified, dispersion strengthened Al–8·5Fe (wt-%) alloy designed for high temperature (up to 400°C) aerospace applications. Both fusion and solid state joining techniques were shown to produce bonds. Fusion techniques destroyed the base metal microstructure with primary Fe3Al, loss of solute, formation of larger aluminium grains, and the formation of grain boundary FeAl3and intermetallics enriched with silicon and vanadium. Solid state friction stir welding did not cause a significant modification to the dispersoid population but there was a loss of solute to dispersoid/matrix interfaces.MST/3500
ISSN:0267-0836
DOI:10.1179/mst.1996.12.11.970
出版商:Taylor&Francis
年代:1996
数据来源: Taylor
|
13. |
Book Reviews |
|
Materials Science and Technology,
Volume 12,
Issue 11,
1996,
Page 978-978
Ray MeadowcroftT.,
Preview
|
PDF (139KB)
|
|
ISSN:0267-0836
DOI:10.1179/mst.1996.12.11.978
出版商:Taylor&Francis
年代:1996
数据来源: Taylor
|
|