|
11. |
Synthese und charakterisierung von butadien‐divinylbenzol‐copolymeren |
|
Die Angewandte Makromolekulare Chemie,
Volume 194,
Issue 1,
1992,
Page 133-148
Kathrin Burghardt,
Karl‐Georg Häusler,
Michael Gerd Martl,
Klaus Hummel,
Ulrich Gebauer,
Klaus Gehrke,
Preview
|
PDF (652KB)
|
|
摘要:
AbstractIm Rahmen von Arbeiten zur Modifizierung des cis‐1,6Polybutadiens wurde die Copolymerisation von Butadien und einer Divinylbenzolfraktion, insbesondere der Bereich mit kleinen Divinylbenzolgehalten, untersucht. Neben dem Ziegler‐Natta‐Katalysator Nickeloctanoat/Bortrifluoridetherat/Aluminiumtriethyl kam auch ein Nickeloctanoat/Titantetrachlorid/Aluminiumtriethyl‐System zur Anwendung, welches es durch seine höhere Aktivität gegenüber Vinylaromaten ermöglicht, großere Mengen der Divinylbenzolfraktion zu polymerisieren. Durch die Anwendung von spektroskopischen, pyrolysegaschromatographischen und thermoanalytischen Charakterisierungsmethoden können Beziehungen zwischen den erhaltenen Glas‐, Kristallisations‐ und Schmelztemperaturen und der Mikrostruktur des Polymeren hergestellt werden. Es zeigt sich, daß sowohl das Divinylbenzol als auch die trans‐1,4 bzw. die 1,2‐Vinyl‐Einheiten statistisch in das Polymere eingebaut werden. Damit eignet sich neben der Pyrolysegaschromatographie besonders die Differential Scanning Calorimetry als eine einfache Methode zur Charakterisierung der Struktur von aus technischen Fraktionen erhaltenen und teilweise
ISSN:0003-3146
DOI:10.1002/apmc.1992.051940111
出版商:Hüthig&Wepf Verlag
年代:1992
数据来源: WILEY
|
12. |
Effects of composition and plastifier on the light scattering of polymer glasses and properties of polymeric optical fibers made from styrene‐methyl methacrylate copolymers |
|
Die Angewandte Makromolekulare Chemie,
Volume 194,
Issue 1,
1992,
Page 149-158
Ladislav Dvořánek,
Čestmír Koňák,
Tomáš Neuhäusl,
Lud'ka Machová,
Miloslav Šorm,
Preview
|
PDF (458KB)
|
|
摘要:
AbstractHigh optical purity polystyrene (PS), poly(methyl methacrylate) (PMMA) and styrene‐methyl methacrylate statistical copolymers (S‐MMA) were prepared. Light scattering measured on polymeric glasses depends on the chemical composition of the polymer and on the refractive index of the plastifier added. An isorefractive plastifier reduces considerably the scattering values for the copolymers S‐MMA, while having no significant effect on the scattering of PMMA. A plastifier with a refractive index different from that of the polymer raises distinctly the light scattering values in all cases. It has been shown that the isorefractive plastifier has a favourable effect on attenuation loss of polymeric optical fibers (POF) obtained from the copolymer S‐
ISSN:0003-3146
DOI:10.1002/apmc.1992.051940112
出版商:Hüthig&Wepf Verlag
年代:1992
数据来源: WILEY
|
13. |
Morphologiebildungs‐ und dispergiermechanismen bei der herstellung und verarbeitung von polymer‐blends aus acrylnitril‐butadien‐styrol‐(ABS)‐ bzw. Styrol‐acrylnitril‐(SAN)‐copolymerisaten mit thermoplastischem polyurethan (TPU) |
|
Die Angewandte Makromolekulare Chemie,
Volume 194,
Issue 1,
1992,
Page 159-178
Hans‐Joachim Radusch,
Rea Hendrich,
Goerg H. Michler,
Irene Naumann,
Preview
|
PDF (1621KB)
|
|
摘要:
AbstractAn ABS/TPU‐ bzw. SAN/TPU‐Blends wurden Untersuchungen zur Morphologiebildung beim Schmelzemischen auf der Basis der Analyse des viskoelastischen Verhaltens der Komponenten angestellt. Unter definierten Bedingungen im Laborkneter gemischte und unter definierten Bedingungen mittels Hochdruckkapillarviskosimeter extrudierte Blendproben wurden hinsichtlich ihrer Phasenmorphologie elektronenmikroskopisch charakterisiert. Die mittels der rheologischen Analyse prognostizierten Morphologietypen und Morphologiebildungsmechanismen konnten anhand der elektronenmikroskopischen Aufnahmen und der quantitativen Morphologieanalyse bestätigt werden. Es zeigte sich, daß das Viskositätsverhältnis der Komponenten primären Einfluß auf die Morphologiebildung ausübt. Darüber hinaus sind auch thermomechanisch induzierte molekulare Abbauvorgänge und thermodynamische Wechselwirkungen sowie damit im Zusammenhang stehende Kristallisationsbedingungen für die TPU‐Phase hinsichtlich der resultierenden Phasenmorphologie nicht zu
ISSN:0003-3146
DOI:10.1002/apmc.1992.051940113
出版商:Hüthig&Wepf Verlag
年代:1992
数据来源: WILEY
|
14. |
Thermostable polyesters containing imide and phenylquinoxaline units |
|
Die Angewandte Makromolekulare Chemie,
Volume 194,
Issue 1,
1992,
Page 179-187
M. Bruma,
I. Sava,
E. Hamciuc,
C. Hamciuc,
N. M. Belomoina,
E. S. Krongauz,
Preview
|
PDF (316KB)
|
|
摘要:
AbstractThermostable, heterocyclic polyesters containing imide and phenylquinoxaline units have been synthesized by solution polycondensation of bis(hydroxyphenylquinoxaline) derivatives with diacid dichlorides containing preformed imide rings or by the reaction of bis(aminophenylquinoxaline) derivatives with dianhydrides containing ester groups. The thermal stability of these compounds is discussed and compared with related heterocyclic polymers. Electrical properties of the polycondensates were also studied.
ISSN:0003-3146
DOI:10.1002/apmc.1992.051940114
出版商:Hüthig&Wepf Verlag
年代:1992
数据来源: WILEY
|
15. |
On the effect of water on the durability of PP and PC/acrylic adhesive joints |
|
Die Angewandte Makromolekulare Chemie,
Volume 194,
Issue 1,
1992,
Page 189-200
V. Di Ruocco,
M. Morra,
E. Occhiello,
F. Garbassi,
Preview
|
PDF (720KB)
|
|
摘要:
AbstractThe stability of PP and PC/acrylic adhesive joints has been assessed using a thermodynamic method based on surface tension components.Surface characterization showed that plasma treatment induces the formation of an oxygen‐rich layer on treated surfaces. In the case of PP this layer does not change its composition upon immersion in water, while for PC leaching of oxidized species with low molecular weight was observed.Both untreated and plasma treated PP joints showed reasonable stability against immersion in water. A small reduction of shear strength was observed, but the fracture remained adhesive for untreated PP and cohesive for plasma treated PP.In the case of PC, only joints made from untreated PC showed fair sensitivity against immersion in water, while those made from plasma treated specimens degraded dramatically. In the latter case the locus of failure moved to the adhesive/adherend interface, the presence of a very hydrophilic, low molecular weight layer being suggested as responsible for this behavio
ISSN:0003-3146
DOI:10.1002/apmc.1992.051940115
出版商:Hüthig&Wepf Verlag
年代:1992
数据来源: WILEY
|
16. |
Antioxidants and stabilizers, 116Influence of the carbon black chezacarb EC on polyolefin thermooxidation: A model study with cyclohexene doped with chain‐breaking antioxidants |
|
Die Angewandte Makromolekulare Chemie,
Volume 194,
Issue 1,
1992,
Page 201-211
Jitka Rotschová,
Jan Pospíšil,
Preview
|
PDF (503KB)
|
|
摘要:
AbstractThe ageing of polyolefins is accelerated by carbon black Chezacarb EC used as a filler. Conditions for selection of suitable chain‐breaking antioxidants protecting against degradation were simulated using cyclohexene doped with various amounts of carbon black and oxidized at 60°C. The results obtained reveal an acceleration of cyclohexene oxidation in the phase following the induction period (IP). The oxidation acceleration is similar to the effect caused by powdered copper(0) or copper(II) ions. Polynuclear phenolic antioxidants are able to stabilize cyclohexene for periods longer than 120 h only in the presence of low amounts of Chezacarb (up to 0.5 wt.‐%). At higher Chezacarb concentrations, merely a prolongation of IP may be achieved. Arylene diamines are efficient stabilizers only if combined with a high concentration of Chezacarb (10 wt.‐%). None of the chain‐breaking antioxidants used was able to diminish the oxidation rate of cyclohexene in the phase
ISSN:0003-3146
DOI:10.1002/apmc.1992.051940116
出版商:Hüthig&Wepf Verlag
年代:1992
数据来源: WILEY
|
17. |
Mitteilungen |
|
Die Angewandte Makromolekulare Chemie,
Volume 194,
Issue 1,
1992,
Page 213-213
Preview
|
PDF (15KB)
|
|
ISSN:0003-3146
DOI:10.1002/apmc.1992.051940117
出版商:Hüthig&Wepf Verlag
年代:1992
数据来源: WILEY
|
|