|
1. |
Recent Advances in High Solids Coatings |
|
Polymer-Plastics Technology and Engineering,
Volume 15,
Issue 1,
1980,
Page 1-49
Masao Takahashi,
Preview
|
PDF (1080KB)
|
|
摘要:
The following three items are general market needs in coatings and paints:
ISSN:0360-2559
DOI:10.1080/03602558008070002
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
2. |
Coating of Levitated Glass Microballoons |
|
Polymer-Plastics Technology and Engineering,
Volume 15,
Issue 1,
1980,
Page 51-60
R. Liepins,
A.T. Lowe,
Preview
|
PDF (756KB)
|
|
摘要:
The coating of microspheres used as laser fusion targets has resulted in the development of a wide range of new technologies [1–4]. Numerous target designs require depositing various materials such as plastics and high and low atomic number metals on glass microballoons (GMB's) which are 100 to 500 pm in diameter and weigh only micrograms. In addition to the handling problems associated with high static charge, small size, and light weight, the uniformity and surface quality requirements of these films are becoming increasingly demanding.
ISSN:0360-2559
DOI:10.1080/03602558008070003
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
3. |
New Trends in Electrolytic Reactor Materials: Diaphragms |
|
Polymer-Plastics Technology and Engineering,
Volume 15,
Issue 1,
1980,
Page 61-82
M.I. Ismail,
N.P. White,
H.P. Dhar,
S.Das Gupta,
Preview
|
PDF (511KB)
|
|
摘要:
The most significant developments in materials used in diaphragms in elecelectrolytic reactors are reviewed. Diaphragms have a wide use in several areas.
ISSN:0360-2559
DOI:10.1080/03602558008070004
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
4. |
High Modulus Rim Systems for Automotive Body Panels: An Update |
|
Polymer-Plastics Technology and Engineering,
Volume 15,
Issue 1,
1980,
Page 83-96
W.A. Ludwico,
Preview
|
PDF (481KB)
|
|
摘要:
Federal mileage requirements for automobiles in 1985 have stimulated the use of lightweight materials for body components. Among the lightweight materials under consideration, reinforced RIM (RRIM) polyurethane is a leading contender and is therefore under current evaluation for several automotive body components including fenders, door panels, and rear quarter panels. In response to these new RIM application areas, the polyurethane raw material suppliers have launched intensive development efforts to ensure the automotive industry of the best possible materials to meet the necessary performance criteria. This paper discusses the performance requirements for reinforced urethane body panels, and extrapolates back to the characteristics of the unfilled base urethanes necessary to meet these requirements. The raw material supplier uses characteristics of the unfilled polyurethane as guidelines in formulation work. These guidelines must be well-defined to facilitate the development of even more effective urethanes for exterior automotive body components in the future.
ISSN:0360-2559
DOI:10.1080/03602558008070005
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
5. |
Editorial board page for “Polymer-Plastics Technology and Engineering”, Volume 15, Number 1 |
|
Polymer-Plastics Technology and Engineering,
Volume 15,
Issue 1,
1980,
Page -
Preview
|
PDF (28KB)
|
|
摘要:
This is a scanned image of the original Editorial Board page(s) for this issue.
ISSN:0360-2559
DOI:10.1080/03602558008070001
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
|