31. |
Continuous rotatable electrical feedthrough |
|
Review of Scientific Instruments,
Volume 56,
Issue 9,
1985,
Page 1833-1834
R. A. Malic,
E. E. Chaban,
Preview
|
PDF (170KB)
|
|
摘要:
A rotatable electrical feedthrough, maintaining continuous contact (as opposed to a wiper arm), is described. The connector takes up rotations of at least 270° by means of a compact clock‐spring arrangement.
ISSN:0034-6748
DOI:10.1063/1.1138104
出版商:AIP
年代:1985
数据来源: AIP
|
32. |
Simple electrostatic quadrupole ion beam deflector |
|
Review of Scientific Instruments,
Volume 56,
Issue 9,
1985,
Page 1834-1835
John W. Farley,
Preview
|
PDF (174KB)
|
|
摘要:
An electrostatic quadrupole device capable of deflecting an ion beam at right angles is described. It is useful for overlapping an ion beam and a laser beam. Its aberrations are negligible in many applications where fine focusing is not required. The construction is simpler and less expensive than other similar devices.
ISSN:0034-6748
DOI:10.1063/1.1138105
出版商:AIP
年代:1985
数据来源: AIP
|
33. |
Reduction of excess low‐frequency noise in rf‐biased SQUID’s |
|
Review of Scientific Instruments,
Volume 56,
Issue 9,
1985,
Page 1835-1837
M. Taber,
B. Cabrera,
Preview
|
PDF (246KB)
|
|
摘要:
We have observed an excess low‐frequency noise associated with the operation of a commercial rf‐biased SQUID (superconducting quantum interference device) sensor in freely convecting liquid helium. A simple technique for reducing convection and suppressing this low‐frequency noise is described.
ISSN:0034-6748
DOI:10.1063/1.1138106
出版商:AIP
年代:1985
数据来源: AIP
|
34. |
Miniature bellows‐free low‐temperature valve |
|
Review of Scientific Instruments,
Volume 56,
Issue 9,
1985,
Page 1838-1840
Gregory F. Spencer,
Gary G. Ihas,
Preview
|
PDF (292KB)
|
|
摘要:
A novel design for a low‐temperature valve is presented. Designed to be used on fill‐line capillaries and flow lines in low‐temperature apparatus, the valve has nearly zero dead volume as well as a very small total volume. It employs no metallic bellows as in standard valve designs. Instead, a Kapton membrane is epoxied into a cylindrical form to provide a flexible diaphragm, which is activated by pressurized helium. The valve is simple to construct, having only one machining operation, and uses materials readily available. It has been tested in liquid helium to be leaktight aboveT&lgr;with a 1‐bar pressure differential across the capillary containing the valve.
ISSN:0034-6748
DOI:10.1063/1.1138107
出版商:AIP
年代:1985
数据来源: AIP
|
35. |
Improved dc current supply for high‐vacuum straight through solenoid valves |
|
Review of Scientific Instruments,
Volume 56,
Issue 9,
1985,
Page 1840-1841
Bernard Boule´,
Jan A. Herman,
Preview
|
PDF (141KB)
|
|
摘要:
An inexpensive improved dc voltage supply for high‐vacuum straight through valves is described. The electronic circuit is composed of two parts: (1) the current generating section which withdraws the valve gate and maintains it in the open position and (2) the section which monitors whether the valve gate is open or closed.
ISSN:0034-6748
DOI:10.1063/1.1138108
出版商:AIP
年代:1985
数据来源: AIP
|