1. |
A new model on K2O solubility in blast‐furnace slags |
|
Archiv für das Eisenhüttenwesen,
Volume 60,
Issue 9,
2016,
Page 383-386
Åke Bergman,
Preview
|
PDF (362KB)
|
|
摘要:
The solubility of K2O in blast‐furnace type slags in equilibrium with a reference slag is derived from the potassium oxide capacity as given by the slag's optical basicity. Optimizing of the blast‐furnace slag and the relation between the elements is discussed.Die Löslichkeit von K2O in Hochofenschlacken im Gleichgewicht mit einer Referenzschlacke wird aus der Kaliumoxidkapazität, die durch die optische Basizität der Schlacke gegeben ist, hergeleitet. Die Verbesserung der Hochofenschlacke und die Beziehung zwischen den Elementen wird diskutiert.
ISSN:0003-8962
DOI:10.1002/srin.198901672
出版商:Wiley
年代:2016
数据来源: WILEY
|
2. |
Flow field and mixing with eccentric gas stirring |
|
Archiv für das Eisenhüttenwesen,
Volume 60,
Issue 9,
2016,
Page 387-394
Jürgen Mietz,
Franz Oeters,
Preview
|
PDF (772KB)
|
|
摘要:
Measurements of the flow pattern using laser‐doppler‐anemometry were performed in a water model system of a gas‐stirred ladle with different locations of the gas injection nozzle. The intensity of the fluid flow is determined by the gas flow rate, its pattern is given by the position of the nozzle. Dead zones at the bottom of the vessel occurring with centric gas injection can be avoided by using an eccentrically positioned nozzle.For eccentric stirring mixing can be described theoretically using a simple tank‐in‐series model with recirculation.
ISSN:0003-8962
DOI:10.1002/srin.198901673
出版商:Wiley
年代:2016
数据来源: WILEY
|
3. |
The ring compression test as simulation test for the investigation of friction in hot metal forming |
|
Archiv für das Eisenhüttenwesen,
Volume 60,
Issue 9,
2016,
Page 395-402
Oskar Pawelski,
Wolfgang Rasp,
Christoph Hoerster,
Preview
|
PDF (767KB)
|
|
摘要:
Forces and flow of material in metal working decisively depend on friction between workpiece and tool, which can be described by the friction factorm. For investigation of the influence of friction in hot forming of steel and for measurement of the friction factor, the ring compression test is used as simulation test. The influences of material, reduction, strain rate, temperature, and lubricant are discussed.
ISSN:0003-8962
DOI:10.1002/srin.198901674
出版商:Wiley
年代:2016
数据来源: WILEY
|
4. |
The predictive capabilities of a thermal model of flat rolling |
|
Archiv für das Eisenhüttenwesen,
Volume 60,
Issue 9,
2016,
Page 403-406
John G. Lenard,
Maciej Pietrzyk,
Preview
|
PDF (352KB)
|
|
摘要:
The predictive capabilities of a thermo‐mechanical model of flat rolling are substantiated by comparing its results to measurements obtained from laboratory tests. Time‐temperature profiles, temperature and strain rate distributions are computed. The model proves to be successful. Differences between calculated and measured temperature values are found to be less than 10%.
ISSN:0003-8962
DOI:10.1002/srin.198901675
出版商:Wiley
年代:2016
数据来源: WILEY
|
5. |
Effect of thermomechanical processing on structure and properties of low carbon steels |
|
Archiv für das Eisenhüttenwesen,
Volume 60,
Issue 9,
2016,
Page 407-411
Bimal Kumar Panigrahi,
Vaidyanatha Ramaswamy,
Suraj Bhan,
Preview
|
PDF (622KB)
|
|
摘要:
The microstructure of one plain carbon and two microalloyed steels has been refined by two different thermomechanical processing schedules in a laboratory rolling mill. The factors controlling the structural refinement have been investigated. The results indicate that a combination of single/two stage rolling prior to reaustenitization treatment and finish rolling in the (α + γ) region followed by controlled cooling improves the mechanical properties by refining the ferrite grain size.
ISSN:0003-8962
DOI:10.1002/srin.198901676
出版商:Wiley
年代:2016
数据来源: WILEY
|
6. |
Dauerschwingverhalten nichtrostender Stähle unter gleichzeitiger korrosiver Beanspruchung, Teil 2: Schwingungsrißkorrosionsverhalten |
|
Archiv für das Eisenhüttenwesen,
Volume 60,
Issue 9,
2016,
Page 412-416
Erwin Roeder,
Gerald Schumacher,
Preview
|
PDF (467KB)
|
|
摘要:
In dieser Arbeit werden die bisher am Lehrstuhl für Werkstoffkunde und Mechanische Technologie der Universität Kaiserslautern durchgeführten Untersuchungen auf dem Gebiet des Schwingungsrißkorrosionsverhaltens nichtrostender Stähle dargestellt.Eine Prüfapparatur zur Durchführung von Dauerschwingversuchen bei kontrollierter elektrochemischer Korrosion wird beschrieben. Die dynamischen Festigkeitskennwerte des untersuchten Stahles X 5 CrTi 12 (1.4512) liegen bei überlagerter Korrosion durch das Modellkondensat wesentlich unter den an Luft ermittelten Werten. Eine Dauerschwingfestigkeit kann erwartungsgemäß nicht bestimmt werden. Der Einfluß der Elektrolyttemperatur von maximal 80°C auf die Schwingfestigkeit ist bei den gewählten Versuchsparametern von untergeordneter Bedeutung. Durch Messung des zeitlichen Verlaufs des freien Korrosionspotentials kann ein Zusammenhang zwischen der Lebensdauer der Schwingproben und der Länge der sich einstellenden Potentialstufen festgestellt werden. Durch Aufprägen geeigneter elektrochemischer Potentiale im potentiostatischen Halteversuch ist eine deutliche Erhöhung der Zeitschwingfestigkeit gegenüber dem unkontrollierten Zustand möglich.
ISSN:0003-8962
DOI:10.1002/srin.198901677
出版商:Wiley
年代:2016
数据来源: WILEY
|
7. |
Magnetic and other physical properties of X 52, X 60, X 70, and X 80 grade linepipe steels |
|
Archiv für das Eisenhüttenwesen,
Volume 60,
Issue 9,
2016,
Page 417-424
Friedhelm Richter,
Preview
|
PDF (649KB)
|
|
摘要:
The following magnetic properties were determined for X 52, X 60, X 70, and X 80 grade linepipe steels: magnetic induction as a function of magnetic field strength in the form of hysteresis loops, coercive force and saturation magnetisation. In addition, the following physical properties were determined: coefficient of thermal expansion between ‐180 and 400°C, elastic constants between ‐180 or 20 and 300°C, electrical resistivity, thermal conductivity and thermal diffusivity between ‐180 and 300°C. The crystallographic textures of the materials were represented by pole figures.
ISSN:0003-8962
DOI:10.1002/srin.198901678
出版商:Wiley
年代:2016
数据来源: WILEY
|
8. |
ECSC announcements |
|
Archiv für das Eisenhüttenwesen,
Volume 60,
Issue 9,
2016,
Page 425-426
Preview
|
PDF (253KB)
|
|
ISSN:0003-8962
DOI:10.1002/srin.198901679
出版商:Wiley
年代:2016
数据来源: WILEY
|
9. |
News from the Max‐Planck‐Institut für Eisenforschung GmbH |
|
Archiv für das Eisenhüttenwesen,
Volume 60,
Issue 9,
2016,
Page 427-428
Preview
|
PDF (219KB)
|
|
ISSN:0003-8962
DOI:10.1002/srin.198901680
出版商:Wiley
年代:2016
数据来源: WILEY
|