1. |
An approach to the design of production systems giving a high quality of working life and production efficiency |
|
International Journal of Production Research,
Volume 18,
Issue 2,
1980,
Page 131-141
RINTARO MURAMATSU,
HARUO MIYAZAKI,
YOSHIHIKO TANAKA,
Preview
|
PDF (171KB)
|
|
摘要:
People's social and economic desires are gradually becoming more versatile and fragmented. Industries should be developed in such a way that these versatile human desires are brought into harmony with the organizational needs of production engineering.
ISSN:0020-7543
DOI:10.1080/00207548008919655
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
2. |
Introducing the repetition pattern of a task into its learning curve |
|
International Journal of Production Research,
Volume 18,
Issue 2,
1980,
Page 143-152
SHLOMO GLOBERSON,
Preview
|
PDF (193KB)
|
|
摘要:
The learning curve is one of the tools in operation planning and control. It enables the planner to estimate future performance of tasks executed either by individuals or organizations. In fact, every task is composed of elements, or subtasks. Therefore, the learning curve of the task is derived from the learning curves of the component elements and their frequency within the task. The paper discusses the nature of the aggregated learning curve as well as ways to calculate the values of its parameters. The nature of the aggregated learning curve is found to be different from its components (that is, the value of its parameters and its equation are not the same).
ISSN:0020-7543
DOI:10.1080/00207548008919656
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
3. |
Computer-aided work study using AUTOMAT and COMPUTE—practical tools for the industrial engineer |
|
International Journal of Production Research,
Volume 18,
Issue 2,
1980,
Page 153-168
NORMANA. SCHOPIELD,
Preview
|
PDF (314KB)
|
|
摘要:
AUTOMAT consists of a range of computer techniques which can assist the Work Study Engineer in the design and evaluation of manual work tasks. AUTOMAT provides a means for introducing MTM at any level of detail with a reduction in the time and cost taken to produce analyses. Since the computer allows the work study engineer to describe an operation using a high-level language while producing output at the detailed MTM-2 level, the time spent on clerical work and calculations is significantly less. The program itself provides a means of studying methods with a view to improvement, and a by-product of using the computer is a high level of consistency.
ISSN:0020-7543
DOI:10.1080/00207548008919657
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
4. |
An approach to the allocation of mechanical system's reliability—EFTES method |
|
International Journal of Production Research,
Volume 18,
Issue 2,
1980,
Page 169-177
J. TODOROVIĆ,
D. ZELENOVIĆ,
Preview
|
PDF (135KB)
|
|
摘要:
In this paper an attempt has been made to develop a method for the allocation of system reliability to system components. The method is adapted to the systems in mechanical engineering. It takes into account changes in environmental conditions, changes in work processes and also some previously developed methods. The method has been developed by introducing the proportionality coefficient, failure rate of the ‘weakest’ system component, and the significance degree of the system component Et.
ISSN:0020-7543
DOI:10.1080/00207548008919658
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
5. |
Comparison of programming costs for N/C machining |
|
International Journal of Production Research,
Volume 18,
Issue 2,
1980,
Page 179-187
MINORU SOEDA,
Preview
|
PDF (131KB)
|
|
摘要:
Programming costs occupy a significant ratio to machining costs when any prototype with complicated forms is tentatively machined. The ratio of the programming cost to the total processing cost will become a more considerable amount as its shape is more complicated, or as its lot size is smaller.
ISSN:0020-7543
DOI:10.1080/00207548008919659
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
6. |
The planning of a manufacturing system: a dynamic model |
|
International Journal of Production Research,
Volume 18,
Issue 2,
1980,
Page 189-199
R. BEDINI,
P. TONI,
Preview
|
PDF (162KB)
|
|
摘要:
The paper studies a dynamical model of a manufacturing process taking into account:
ISSN:0020-7543
DOI:10.1080/00207548008919660
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
7. |
An interactive approach to computer aided facility layout |
|
International Journal of Production Research,
Volume 18,
Issue 2,
1980,
Page 201-211
C. O'BRIEN,
S. E. Z. ABDEL BARR,
Preview
|
PDF (282KB)
|
|
摘要:
In all manufacturing and service industries the layout of facilities is an important determinant of operating efficiency and costs. Whenever the flow of materials or people is complex, computerized procedures offer the only feasible means of developing and evaluating alternative arrangements.
ISSN:0020-7543
DOI:10.1080/00207548008919661
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
8. |
Machine-component grouping in production flow analysis: an approach using a rank order clustering algorithm |
|
International Journal of Production Research,
Volume 18,
Issue 2,
1980,
Page 213-232
J. R. KING,
Preview
|
PDF (267KB)
|
|
摘要:
Existing cluster analysis methods are reviewed and a new approach using a rank order clustering algorithm is described which is particularly relevant to the problem of machine-component group formation. A relaxation and regrouping procedure is developed whereby the basic rank order clustering method may be extended to the case where there are bottleneck machines.
ISSN:0020-7543
DOI:10.1080/00207548008919662
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
9. |
Separable programming as a solution methodology for aggregate production planning |
|
International Journal of Production Research,
Volume 18,
Issue 2,
1980,
Page 233-243
J. T. MEIJ,
Preview
|
PDF (163KB)
|
|
摘要:
Many Production Managers are faced with the problem of planning production, inventory and work force under the constraint of limited resources to meet a seasonal demand. Considerable research has been done on this planning problem and various models have been proposed. The linear decision rule (LDR), especially as applied to the well-known Paint Shop, represents a milestone in the development of such models and serves as a standard against which the performances of many other models are measured.
ISSN:0020-7543
DOI:10.1080/00207548008919663
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|
10. |
Analysis of production ordering quantities and inventory variations in a multi-stage production ordering system |
|
International Journal of Production Research,
Volume 18,
Issue 2,
1980,
Page 245-257
TSUTOMU TABE,
RINTARO MURAMATSU,
YOSHIHIKO TANAKA,
Preview
|
PDF (199KB)
|
|
摘要:
In the Japanese automobile and electrical industries it is often necessary to consider the production ordering systems as multi-stage production inventory systems. Previous analyses of production ordering systems have left untouched the variations in the production ordering quantities and inventory at each stage, in spite of the fact that the amplification phenomena of these variations are critical in a multi-stage production inventory system. Generally, we are able to classify the multi-stage production ordering systems into two types, i.e. the push-type and the pull-type. This paper discusses the following subjects concerning the push-type and multi-stage production ordering system based on forecasting: (1) the effects of demand fluctuations and forecast errors on the amplification of production order variations and inventory variations in terms of a basic production ordering model, and (2) the same effects in a modified production ordering model which is able to decrease both the variations in the production ordering quantities and in the inventory at each stage.
ISSN:0020-7543
DOI:10.1080/00207548008919664
出版商:Taylor & Francis Group
年代:1980
数据来源: Taylor
|