|
1. |
Control of flexible joint robots via external linearization approach |
|
Journal of Robotic Systems,
Volume 7,
Issue 1,
1990,
Page 1-22
Lih‐Chang Lin,
King Yuan,
Preview
|
PDF (864KB)
|
|
摘要:
AbstractBased on the feedback linearization structure algorithm of differential geometric nonlinear control theory, an external linearization approach to the control of multilink flexible joint robots is considered in this article. The resulting externally linearized and input‐output decoupled closed‐loop system contains a linear subsystem and a nonlinear subsystem. The linear part describing the rigid motor motions is suitable for the design of nominal trajectory following control. However, the nonlinear joint deformation subsystem will cause perturbations in the nominal trajectory. To actively damp out the elastic vibrations and to render the complete closed‐loop system robust to uncertainty in system parameters, a combined LQR stabilizer and servocompensator is used as the internal stabilization and error correcting control. The tracking errors of the end effector caused by the quasi‐static joint deflections due to gravity can be compensated for by taking into account the nominal deflections in the trajectory planning and LQ regulation. A three‐link PUMA type arm is tested via s
ISSN:0741-2223
DOI:10.1002/rob.4620070102
出版商:Wiley Subscription Services, Inc., A Wiley Company
年代:1990
数据来源: WILEY
|
2. |
An efficient local approach for the path generation of robot manipulators |
|
Journal of Robotic Systems,
Volume 7,
Issue 1,
1990,
Page 23-55
R. V. Mayorga,
A. K. C. Wong,
K. S. Ma,
Preview
|
PDF (1409KB)
|
|
摘要:
AbstractIn this article an efficient local approach for the path generation of robot manipulators is presented. The approach is based on formulating a simple nonlinear programming problem. This problem is considered as a minimization of energy with given robot kinematics and subject to the robot requirements and a singularities avoidance constraint. From this formulation a closed form solution is derived which has the properties that allows to pursue both singularities and obstacle avoidance simultaneously; and that it can incorporate global information. These properties enable the accomplishment of the important task that while a specified trajectory in the operational space can be closely followed, also a desired joint configuration can be attained accurately at a given time. Although the proposed approach is primarily developed for redundant manipulators, its application to nonredundant manipulators is examplified by considering a particular commercial manipulator.
ISSN:0741-2223
DOI:10.1002/rob.4620070103
出版商:Wiley Subscription Services, Inc., A Wiley Company
年代:1990
数据来源: WILEY
|
3. |
An efficient algorithm for computation of manipulator inertia matrix |
|
Journal of Robotic Systems,
Volume 7,
Issue 1,
1990,
Page 57-80
Amir Fijany,
Antal K. Bejczy,
Preview
|
PDF (1054KB)
|
|
摘要:
AbstractIn this article an efficient algorithm for computation of the manipulator inertia matrix is presented. The algorithm is derived based on Newton's and Euler's laws governing the motion of rigid bodies. Using spatial notations, the algorithm leads to the definition of the composite rigid‐body spatial inertia which is a spatial representation of the notion of augmented body. The equations resulting from this algorithm are derived in a coordinate‐free form. The choice of the coordinate frame for projection of the coordinate‐free equations, that is, theintrinsicequations, is discussed by analyzing the vectors and the tensors involved in the final equations. Previously proposed algorithms, the physical interpretations leading to their derivation, and the redundancy in their computations are analyzed. The developed algorithm achieves a greater efficiency by eliminating the redundancy in the intrinsic equations as well as by a suitable choice of coordinate frame for projection of the intrinsic equa
ISSN:0741-2223
DOI:10.1002/rob.4620070104
出版商:Wiley Subscription Services, Inc., A Wiley Company
年代:1990
数据来源: WILEY
|
4. |
Experimental study on direct adaptive control of a PUMA 560 industrial robot |
|
Journal of Robotic Systems,
Volume 7,
Issue 1,
1990,
Page 81-105
H. Seraji,
T. Lee,
M. Delpech,
Preview
|
PDF (1064KB)
|
|
摘要:
AbstractThe article describes the implementation and experimental validation of a new direct adaptive control scheme on a PUMA 560 industrial robot. The testbed facility consists of a Unimation PUMA 560 six‐jointed robot and controller, and a DEC Micro VAX II computer which hosts the RCCL (Robot Control “C” Library) software. The control algorithm is implemented on the Micro VAX which acts as a digital controller for the PUMA robot, and the Unimation controller is effectively bypassed and used merely as an I/O device to interface the Micro VAX to the joint motors. The control algorithm for each robot joint consists of an auxiliary signal generated by a constant‐gain PID controller, and an adaptive position‐velocity (PD) feedback controller with adjustable gains. The adaptive independent joint controllers compensate for the interjoint couplings and achieve accurate trajectory tracking without the need for the complex dynamic model and parameter values of the robot. Extensive experimental results on PUMA joint control are presented to confirm the feasibility of the proposed scheme, in spite of strong interactions between joint motions. The scheme is also implemented for control of the end‐effector motion in Cartesian space. Experimental results validate the capabilities of the proposed control scheme. The control scheme is extremely simple and computationally very fast for concurrent processing with high sam
ISSN:0741-2223
DOI:10.1002/rob.4620070105
出版商:Wiley Subscription Services, Inc., A Wiley Company
年代:1990
数据来源: WILEY
|
5. |
A global approach for the optimal path generation of redundant robot manipulators |
|
Journal of Robotic Systems,
Volume 7,
Issue 1,
1990,
Page 107-128
R. V. Mayorga,
A. K. C. Wong,
Preview
|
PDF (885KB)
|
|
摘要:
AbstractIn this article the optimal path generation of redundant robot manipulators is considered as an optimization problem, with given kinematics and subject to the robot requirements and a singularities avoidance constraint. This problem is formulated as a constrained continuous optimal control problem, which allows to consider joints and velocities constraints and/or manipulator dynamics. This approach is exemplified for a planar redundant manipulator and the resultant state constrained problem is solved by an efficient iterative numerical technique.
ISSN:0741-2223
DOI:10.1002/rob.4620070106
出版商:Wiley Subscription Services, Inc., A Wiley Company
年代:1990
数据来源: WILEY
|
6. |
An efficient algorithm for finding a collision‐free path among polyhedral obstacles |
|
Journal of Robotic Systems,
Volume 7,
Issue 1,
1990,
Page 129-137
Li‐Chen Fu,
Dong‐Yueh Liu,
Preview
|
PDF (527KB)
|
|
摘要:
AbstractThe use of graph search algorithms on a so called “visibility graph” is a common approach to finding a minimum‐distance collision‐free path among polyhedral obstacles in a 2D environment. Complexity of the search can be greatly reduced by reducing the size of the graph. The focus of this article is to provide an algorithm aimed at constructing asubvisibilitygraph using only “necessary” obstacles, i.e., excluding as many obstacles as possible whose vertices are never via points of the shortest collisio
ISSN:0741-2223
DOI:10.1002/rob.4620070107
出版商:Wiley Subscription Services, Inc., A Wiley Company
年代:1990
数据来源: WILEY
|
7. |
Masthead |
|
Journal of Robotic Systems,
Volume 7,
Issue 1,
1990,
Page -
Preview
|
PDF (55KB)
|
|
ISSN:0741-2223
DOI:10.1002/rob.4620070101
出版商:Wiley Subscription Services, Inc., A Wiley Company
年代:1990
数据来源: WILEY
|
|