|
|
| 1. |
editorial |
| |
Heat Transfer Engineering,
Volume 17,
Issue 3,
1996,
Page 3-4
KennethJ. Bell,
Preview
|
PDF (106KB)
|
|
ISSN:0145-7632
DOI:10.1080/01457639608939876
出版商:Taylor & Francis Group
年代:1996
数据来源: Taylor
|
| 2. |
One-Dimensional Analysis of Maximum Performance in a Closed Two-Phase Thermosyphon with a Crossover Flow Separator |
| |
Heat Transfer Engineering,
Volume 17,
Issue 3,
1996,
Page 19-28
L. LIN,
M. GROLL,
S. RÖSLER,
Preview
|
PDF (515KB)
|
|
摘要:
A comprehensive model is developed to calculate the maximum performance of a thermosyphon with a built-in crossover separator. Mechanisms limiting performance are considered to be a flow instability in a natural-circulation two-phase flow system at low reduced pressures (e.g., for Freon-11, pr< 0.126) and at low total mass flux and wave film spoiling at moderate reduced pressures, respectively. Which limit becomes dominant depends on the operating conditions, as shown by the experimental data
ISSN:0145-7632
DOI:10.1080/01457639608939877
出版商:Taylor & Francis Group
年代:1996
数据来源: Taylor
|
| 3. |
Critical Conditions for Collapse of Annular Flow in a Rotating Heat Pipe with a Cylindrical Wall |
| |
Heat Transfer Engineering,
Volume 17,
Issue 3,
1996,
Page 29-34
L. LIN,
M. GROLL,
Preview
|
PDF (499KB)
|
|
摘要:
The stability of annular flow in a rotating heat pipe with a cylindrical wall is investigated. Critical conditions are established for the collapse of the annular liquid body; a first-order perturbation solution of the two-dimensional flow equations is presented. These criteria are applicable to viscous as well as inviscid annular flow, which corresponds to the limiting case of large Reynolds numbers. The theoretical results are compared with experimental data from visualization experiments, in which water is employed as the working fluid. A modification of a criterion for inviscid flow is made.
ISSN:0145-7632
DOI:10.1080/01457639608939878
出版商:Taylor & Francis Group
年代:1996
数据来源: Taylor
|
| 4. |
The Sizing and Passage Arrangement of Multistream Plate-Fin Heat Exchangers |
| |
Heat Transfer Engineering,
Volume 17,
Issue 3,
1996,
Page 35-43
B. S. V. PRASAD,
Preview
|
PDF (375KB)
|
|
摘要:
A simple and effective method is presented for the sizing and passage apportionment of multistream plate-fin heat exchangers. Methods for passage arrangement are discussed, and it is shown that a symmetric or “mixed” passage arrangement is more efficient than a “segregated” arrangement. A method for assessing the relative merits of various passage arrangements is presented. The use of the methods is illustrated through a worked example.
ISSN:0145-7632
DOI:10.1080/01457639608939879
出版商:Taylor & Francis Group
年代:1996
数据来源: Taylor
|
| 5. |
Optimum Design of Radiating and Convecting-Radiating Fins |
| |
Heat Transfer Engineering,
Volume 17,
Issue 3,
1996,
Page 44-78
A. AZIZ,
ALLAND. KRAUS,
Preview
|
PDF (1619KB)
|
|
ISSN:0145-7632
DOI:10.1080/01457639608939880
出版商:Taylor & Francis Group
年代:1996
数据来源: Taylor
|
|
首页
