1. |
Diary |
|
Strain,
Volume 25,
Issue 1,
1989,
Page 3-3
Preview
|
PDF (101KB)
|
|
摘要:
The Secretary of the British Society for Strain Measurement wishes to point out that the dates of some Regional and Technical Group meetings are subject to final confirmation by speakers. Firm dates are notified in BSSM Newsletter which is sent periodically to members and arrangements can be confirmed by contacting the Regional Secretary indicated or BSSM Office
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1989.tb00679.x
出版商:Blackwell Publishing Ltd
年代:1989
数据来源: WILEY
|
2. |
Residual stress measurements in a cruciform welded joint using hole drilling and strain gauges |
|
Strain,
Volume 25,
Issue 1,
1989,
Page 7-14
H.L. Pang,
S.R. Pukas,
Preview
|
PDF (490KB)
|
|
摘要:
Residual stress measurements were made close to the toe of each fillet weld on a load carrying cruciform welded specimen by the hole drilling technique. A standard milling guide with high speed air turbine was used in conjunction with bonded resistance strain gauge rosettes. Experimental calibrations of the method were conducted under known uniform uniaxial tension loads.A simple incremental drilling technique was used to determine the stress gradient with hole depth. Measurements were also made both at zero load and known tensile loads in order to study the interaction between residual stresses and the applied loads.
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1989.tb00680.x
出版商:Blackwell Publishing Ltd
年代:1989
数据来源: WILEY
|
3. |
TERSA—A new technique for assessing residual stress |
|
Strain,
Volume 25,
Issue 1,
1989,
Page 15-19
D.S. Mountain,
G. P. Cooper,
Preview
|
PDF (534KB)
|
|
摘要:
This paper outlines a completely new technique which could provide the basis of an instrument for the non‐contacting and non‐destructive determination of static and residual stresses in engineering components, assemblies and structures. The method has been given the acronym of TERSA, standing for Thermal Evaluation for Residual Stress Analysis and would be applicable to a range of metals, both ferrous and non‐ferrous and also to plastics. Some experimental work is described and results are presented which confirm the principle of the pro
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1989.tb00681.x
出版商:Blackwell Publishing Ltd
年代:1989
数据来源: WILEY
|
4. |
Direct pneumatic pressure in a clamping technique during strain gauge bonding |
|
Strain,
Volume 25,
Issue 1,
1989,
Page 21-23
P.J. Sell,
Preview
|
PDF (404KB)
|
|
摘要:
A technique is described for the clamping of metallic foil strain gauges during epoxy adhesion bonding to non ‐porous surfaces. Following application of the uncured adhesive, the gauge is conformed to the surface using self‐adhesive tape and the workpiece placed in a pressurised environment for the duration of cure. The pnematically derived clamping pressure is transmitted directly to the glue line, and is equal to the pressure within the containment vessel. Since the clamping pressure is both uniform over the strain gauge area, and readily reproducible between installations, it is possible to produce consistent gauge performance. The technique may offer time and cost advantages over classical clamping methods where gauges are installed on small, intricate, or batch components in stress analysis and transducer applicati
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1989.tb00682.x
出版商:Blackwell Publishing Ltd
年代:1989
数据来源: WILEY
|
5. |
technical note Linear variable differential transformers — Practical hints |
|
Strain,
Volume 25,
Issue 1,
1989,
Page 25-26
S.J. Collins,
Preview
|
PDF (204KB)
|
|
摘要:
Some years ago, a requirement existed for the development of a transducer of the LVDT type having the greatest possible sensitivity and of the smallest possible size. It was developed by a purely intuitive process and resulted in a series of devices having a variety of practical applications. In particular, its use as an extensometer could be of interest in the field of strain measurement.
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1989.tb00683.x
出版商:Blackwell Publishing Ltd
年代:1989
数据来源: WILEY
|
6. |
book reviews |
|
Strain,
Volume 25,
Issue 1,
1989,
Page 27-28
Preview
|
PDF (216KB)
|
|
摘要:
Book reviewed in this article:Advanced applied stress analysis,by C T F RossLarge deformations of solids ‐ physical basis and mathematical modelling,edited by J Gittus, J Zarka and S Nemat‐NasserBoundary element methods in elastodynamia,by G D Manolis and D E Be
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1989.tb00684.x
出版商:Blackwell Publishing Ltd
年代:1989
数据来源: WILEY
|
7. |
society news |
|
Strain,
Volume 25,
Issue 1,
1989,
Page 29-30
Preview
|
PDF (491KB)
|
|
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1989.tb00685.x
出版商:Blackwell Publishing Ltd
年代:1989
数据来源: WILEY
|
8. |
industrial and research news |
|
Strain,
Volume 25,
Issue 1,
1989,
Page 31-34
Preview
|
PDF (684KB)
|
|
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1989.tb00686.x
出版商:Blackwell Publishing Ltd
年代:1989
数据来源: WILEY
|
9. |
new products |
|
Strain,
Volume 25,
Issue 1,
1989,
Page 35-38
Preview
|
PDF (286KB)
|
|
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1989.tb00687.x
出版商:Blackwell Publishing Ltd
年代:1989
数据来源: WILEY
|