1. |
Diary |
|
Strain,
Volume 24,
Issue 1,
1988,
Page 3-3
Preview
|
PDF (116KB)
|
|
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1988.tb00648.x
出版商:Blackwell Publishing Ltd
年代:1988
数据来源: WILEY
|
2. |
The derivation of the stresses in a pressurised pipe or cylindrical vessel with initial geometric imperfections |
|
Strain,
Volume 24,
Issue 1,
1988,
Page 7-14
Alwyn S. Tooth,
Ong Lin‐Seng,
Preview
|
PDF (894KB)
|
|
摘要:
Several analytical methods are outlined to deal with the title problem when the vessel is free of external constraints. In essence these correspond to the Haigh equation, which provides a nonlinear relationship between the induced circumferential stress and the applied internal pressure. To make use of these analyses a survey of the cross sectional profile is required. The approach using an internal swinging arm has been found most useful. The extent to which an improved Haigh equation is valid is examined with reference to the pneumatic loading of a twin saddle supported horizontal vessel which contains imperfections and restraints at the supports.
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1988.tb00649.x
出版商:Blackwell Publishing Ltd
年代:1988
数据来源: WILEY
|
3. |
Automated photoelastic analysis |
|
Strain,
Volume 24,
Issue 1,
1988,
Page 15-20
E. A. Patterson,
Preview
|
PDF (721KB)
|
|
摘要:
Photoelastic stress analysis can be a long and tedious process. However recent and current developments in the field of automated and computer aided photoelastic analysis mean that it is becoming possible to do more complex analysis and to perform it more quickly. This paper provides a survey of these developments and the advances in polariscope design.
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1988.tb00650.x
出版商:Blackwell Publishing Ltd
年代:1988
数据来源: WILEY
|
4. |
An alternative determination of unmodified temperature T1for eliminating thermal strain during load testing of engineering structures |
|
Strain,
Volume 24,
Issue 1,
1988,
Page 21-23
Tu Hsiang‐Te,
Preview
|
PDF (271KB)
|
|
摘要:
A method of determining the unmodified temperature, T1, for elimination of thermal strain from the load testing is presented. It is based on the fact that the intersection point of two T–ε lines for a test point shows zero stress (or strain) and coincides with the known zero stress at the neutral axis of the structure, if the test point is set at the axis. The abscissa of this intersection point indicates the unmodified temperature T1. The method has been applied to the load test on a suspect beam in a 4‐storey building. The conclusion was reached that although the suspect beam was weaker than normal, it could take the assigned load without any remedial measures. This conclusion was verified by the practical evidence of normal service for more than five years.The method is applicable to certain types of structures at the mo
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1988.tb00651.x
出版商:Blackwell Publishing Ltd
年代:1988
数据来源: WILEY
|
5. |
Three dimensional displacement measurement using Moiré interferometry |
|
Strain,
Volume 24,
Issue 1,
1988,
Page 25-26
A. Asundi,
M. T. Cheung,
Preview
|
PDF (1192KB)
|
|
摘要:
Moiré interferometry is used to simultaneously measure the in plane and out of plane displacement components. The high sensitivity of displacement measurement is maintained and high contrast fringes are obtained without recourse to additional filtering
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1988.tb00652.x
出版商:Blackwell Publishing Ltd
年代:1988
数据来源: WILEY
|
6. |
BOOK REVIEWS |
|
Strain,
Volume 24,
Issue 1,
1988,
Page 27-28
Preview
|
PDF (205KB)
|
|
摘要:
Book reviewed in this article:The art in structural design, by A. HolgateFracture of non‐metallic materials, edited by K. P. Herrman and L.H. LarssonSteel in marine structures, edited by C. Noordhoek and J. de Ba
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1988.tb00653.x
出版商:Blackwell Publishing Ltd
年代:1988
数据来源: WILEY
|
7. |
society news |
|
Strain,
Volume 24,
Issue 1,
1988,
Page 29-32
Preview
|
PDF (1088KB)
|
|
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1988.tb00654.x
出版商:Blackwell Publishing Ltd
年代:1988
数据来源: WILEY
|
8. |
Systems for engineering test and measurement |
|
Strain,
Volume 24,
Issue 1,
1988,
Page 33-36
Preview
|
PDF (400KB)
|
|
摘要:
Drawing on their expertise in a wide range of engineering disciplines, Stockport based engineering consultancy AV Technology Limited have established a new Integrated Systems Group to design, install and support customised systems for engineering test and measurement.
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1988.tb00655.x
出版商:Blackwell Publishing Ltd
年代:1988
数据来源: WILEY
|
9. |
SANDWICH LOAD CELLS |
|
Strain,
Volume 24,
Issue 1,
1988,
Page 37-41
Preview
|
PDF (4545KB)
|
|
摘要:
The photograph shows one of a batch of 'sandwich' load cells made up to answer a common problem; a relatively large diameter column passes through a fixed structure with a remote control tool at the end of the column. It was required to measure and control the load exerted between the column and the surrounding fixed structure.
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1988.tb00656.x
出版商:Blackwell Publishing Ltd
年代:1988
数据来源: WILEY
|
10. |
Abstracts |
|
Strain,
Volume 24,
Issue 1,
1988,
Page 44-44
Preview
|
PDF (76KB)
|
|
ISSN:0039-2103
DOI:10.1111/j.1475-1305.1988.tb00657.x
出版商:Blackwell Publishing Ltd
年代:1988
数据来源: WILEY
|