摘要:

JANUARY 1923. Vol. XLVIII. No. 562. THE ANALYST PROCEEDINGS AND OF THE SOCIETY OF PUBLIC ANALYSTS OTHER ANALYTICAL CHEMISTS. AN Ordinary Meeting of the Society was held on Wednesday December 6th at the Chemical Society’s Rooms Burlington House. The President Mr. P. A. Ellis Richards F.I.C. was in the chair. Certificates were read for the first time in favour of Messrs. George Henry Appleyard F.I.C. John Walter Black B.Sc. John Matthew Wilkie B.Sc., F.I.C. and Arthur William Starey A.R.C.S. BSc. A.I.C. Certificates were read for the second time in favour of Messrs. Henry Aldous Bromley Robert Faraday Innes F.I.C. Osman Jones F.I.C. ,41an West Stewart DSc. (Brux.) A.I.C. William Heaton Thorns Walter Horace Clulow, and William Plenderleith Lewellen Hope. The following were elected Members of the Society :-Messrs.Frederick John Martin M.A. (Can!ab) A.I.C.; George Scott Robertson D.Sc. F.I.C.; and Frederick Stanley Shadbolt A.I.C. The following papers were read:-“A Note on the Estimation of Formalde-hyde and Acetaldehyde,” by E. W. Blair BSc. D.I.C. A.I.C. and T. Shirlock Wheeler B.Sc. A.R.C.Sc.I. A.I.C. ; “A Sliding Scale for the Convenient Titration of Strong Liquids by Dilution and Use with Aliquot Parts,” by C. H. Douglas Clark B.Sc. D.I.C. A.I.C.; “Note on the Presence of Sulphur Dioxide in Cattle Foodstuffs after Fumigation,’’ by H. A. Peacock B.Sc. ; “ Some Observations with regard to the Unsaponifiable Matter and Sterols of Edible Fats,” by D. W. Steuart B.Sc.; and “Note on the Sulphuric Acid Test for Fish Liver Oils,” by Norman Evers BSc. F.I.C. and H. J. Foster. Deaths. WE regret to record the deaths of two of our Members: Horace Fabian Cheshire on Nov. 8th 1922. Robert George Grimwood on Dec. 24th 1922. Obituary notices will be published later

ISSN:0003-2654    

DOI:10.1039/AN9234800001

出版商:RSC    

年代:1923

数据来源: RSC

摘要:

ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem.Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ...... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C.of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w.P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust.The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ...... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C.basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C.of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene.w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins .. . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust.The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W.P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C.basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C.of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene.w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust.The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ...... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.

ISSN:0003-2654    

DOI:10.1039/AN9234800002

出版商:RSC    

年代:1923

数据来源: RSC

摘要:

ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem.Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.

ISSN:0003-2654    

DOI:10.1039/AN9234800016

出版商:RSC    

年代:1923

数据来源: RSC

摘要:

ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.

ISSN:0003-2654    

DOI:10.1039/AN9234800018

出版商:RSC    

年代:1923

数据来源: RSC

摘要:

ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem.Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ...... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C.of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w.P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust.The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.

ISSN:0003-2654    

DOI:10.1039/AN9234800019

出版商:RSC    

年代:1923

数据来源: RSC

摘要:

ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem.Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.

ISSN:0003-2654    

DOI:10.1039/AN9234800025

出版商:RSC    

年代:1923

数据来源: RSC

摘要:

ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.

ISSN:0003-2654    

DOI:10.1039/AN9234800027

出版商:RSC    

年代:1923

数据来源: RSC

摘要:

ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem.Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ...... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.

ISSN:0003-2654    

DOI:10.1039/AN9234800029

出版商:RSC    

年代:1923

数据来源: RSC

摘要:

ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem.Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ...... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.

ISSN:0003-2654    

DOI:10.1039/AN9234800033

出版商:RSC    

年代:1923

数据来源: RSC

摘要:

ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem.Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ...... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.

ISSN:0003-2654    

DOI:10.1039/AN9234800037

出版商:RSC    

年代:1923

数据来源: RSC