1. |
Exponential smoothing of learning curve data |
|
International Journal of Production Research,
Volume 15,
Issue 1,
1977,
Page 1-15
D. R. TOWILL,
Preview
|
PDF (487KB)
|
|
摘要:
The paper investigates the effect of exponentially smoothing learning curve data plotted in the time constant model form. In the time domain, the result is a smoothed, delayed version, of the raw data. Attenuation of scatter about the trend line is predicted using the z transform method to establish the exponential smoother frequency response. The optimum time shift for trend correction is determined by an analogue method based on the Matsuburu time delay theorem, the result being identical to that obtained using the ‘ equivalent age of data ’ concept. Results for six industrial operators performing light assembly tasks confirm the optimum time delay prediction as judged by the minimization of mean square error criterion, and the frequency response analysis is confirmed on application to a learning curve describing crew performance during a simulated naval underwater mission.
ISSN:0020-7543
DOI:10.1080/00207547708943099
出版商:Taylor & Francis Group
年代:1977
数据来源: Taylor
|
2. |
The use of decision table logic in a manufacturing system |
|
International Journal of Production Research,
Volume 15,
Issue 1,
1977,
Page 17-26
D. A. MILNER,
Preview
|
PDF (359KB)
|
|
摘要:
Decision tables provide a graphical representation of complex procedures in a way that is easy to visualize and understand. The work required to define the system, develop and programme the solution and to provide the often neglected documentation can be incorporated in a tabular form so that all elements of decision taking are precisely denned. The tables present the relationships among the interfacing variables dearly and show the necessary sequences of conditions and actions in a simple manner. The writing and development of decision tables for implementation in a manufacturing system is indicated here giving details of appropriate checking procedures and con straint boundaries.
ISSN:0020-7543
DOI:10.1080/00207547708943100
出版商:Taylor & Francis Group
年代:1977
数据来源: Taylor
|
3. |
Forecasting of critical materials flow Managerial decisions utilizing sequential methodology |
|
International Journal of Production Research,
Volume 15,
Issue 1,
1977,
Page 27-36
MICHAELS. PARKS,
J. M. MOGG,
WILLIAMB. LEE,
Preview
|
PDF (364KB)
|
|
摘要:
This paper addresses a significant problem in the management of production/logistics systems: the influence of quality control activities on production scheduling. A sequential three-way classification decision model is presented for rapidly identifying trends in vendor lot quality. The effectiveness of this decision model is illustrated using a simulation model of a material and information flow system. The results show significant cost savings using this approach rather than the more traditional and passive methods of control over vendor quality.
ISSN:0020-7543
DOI:10.1080/00207547708943101
出版商:Taylor & Francis Group
年代:1977
数据来源: Taylor
|
4. |
A Bayesian approach to the optimal control of continuous industrial processes |
|
International Journal of Production Research,
Volume 15,
Issue 1,
1977,
Page 37-45
S.CHRISTIAN ALBRIGHT,
ROBERTS. COLLINS,
Preview
|
PDF (328KB)
|
|
摘要:
An adaptive control algorithm is formulated which provides, in real time, an optimal adjustment to a controller Bet-point in response to changes in the operating characteristics of the process. Such an algorithm is applicable to a variety of industrial processes: for example, those in which the product is either a containerized consumable or a sheet of some type.
ISSN:0020-7543
DOI:10.1080/00207547708943102
出版商:Taylor & Francis Group
年代:1977
数据来源: Taylor
|
5. |
Prediction of tool life in hot machining of alloy steels |
|
International Journal of Production Research,
Volume 15,
Issue 1,
1977,
Page 47-63
K. C. LO,
N. N. S. CHEN,
Preview
|
PDF (421KB)
|
|
摘要:
Response surface methodology had been applied to tool-life study in conventional machining. This paper presents results of the application of this statistical technique to direct current hot machining. A tool-life predicting equation with four variables of speed, feed, depth of cut and direct current was developed. Good correlation between the predicted and actual tool-life test results was obtained.
ISSN:0020-7543
DOI:10.1080/00207547708943103
出版商:Taylor & Francis Group
年代:1977
数据来源: Taylor
|
6. |
A rate is a rate is a rate? (with apologies to Gertrude Stein) |
|
International Journal of Production Research,
Volume 15,
Issue 1,
1977,
Page 65-72
EMILE KAY,
Preview
|
PDF (309KB)
|
|
摘要:
In the literature on reliability the term failure rate is given to four different concepts. To remedy some of the confusion thereby engendered the differences in meaning and applicability of the four concepts are discussed.
ISSN:0020-7543
DOI:10.1080/00207547708943104
出版商:Taylor & Francis Group
年代:1977
数据来源: Taylor
|
7. |
A conveyor system with homogeneous and heterogeneous servers with dual input |
|
International Journal of Production Research,
Volume 15,
Issue 1,
1977,
Page 73-85
C. L. PROCTOR,
E. A.EL SAYED,
H. A. EIAYAT,
Preview
|
PDF (299KB)
|
|
摘要:
The basic objective of this paper is to investigate the ordered entry conveyor serviced production system with dual input, and to analyse the probabilistic nature of such a system through the application of queueing theory. A mathematical model was developed for the three channel ordered entry conveyor system with two types of arrivals having independent Poisson distribution.
ISSN:0020-7543
DOI:10.1080/00207547708943105
出版商:Taylor & Francis Group
年代:1977
数据来源: Taylor
|
8. |
A survey of literature on reordering of stock items for production inventories |
|
International Journal of Production Research,
Volume 15,
Issue 1,
1977,
Page 87-105
LEONARD FORTUIN,
Preview
|
PDF (767KB)
|
|
摘要:
The problem of inventory control has received increasing attention over the last 16 to 20 years, which has resulted in a vast amount of literature. Two types of inventory can be distinguished: (1)manufacturinginventories, which contain dependent demand items and are most efficiently controlled by means of Material Requirements Planning (MRP), and (2)distributioninventories, which contain independent demand items and for which Statistical Inventory Control (SIC) techniques are usually employed.
ISSN:0020-7543
DOI:10.1080/00207547708943106
出版商:Taylor & Francis Group
年代:1977
数据来源: Taylor
|
9. |
An integrated inventory model for a single supplier-single customer problem |
|
International Journal of Production Research,
Volume 15,
Issue 1,
1977,
Page 107-111
S. K. GOYAL,
Preview
|
PDF (136KB)
|
|
摘要:
The method given in this paper is typically applicable to those inventory problems where a product is procured by a single customer from a single supplier. An example has been solved to illustrate the method.
ISSN:0020-7543
DOI:10.1080/00207547708943107
出版商:Taylor & Francis Group
年代:1977
数据来源: Taylor
|
10. |
A review of: “Applied Productivity Analysis for Industry.” By S. EILON, B. GOLD AND J. SOESAN. (Pergamon Press Ltd, 1976.) [Pp. 151.] Price £8 00 (hardback), £5-00 (flexi-cover), |
|
International Journal of Production Research,
Volume 15,
Issue 1,
1977,
Page 115-116
JOHN ROUBKE,
Preview
|
PDF (67KB)
|
|
ISSN:0020-7543
DOI:10.1080/00207547708943109
出版商:Taylor & Francis Group
年代:1977
数据来源: Taylor
|