The friction coefficient of solid poly(n-alkyl methacrylates) decreases progressively with increasing length of the alkyl group. This behavior parallels the behavior of adsorbed films of these polymers from solution on solid surfaces. Durability of thin films of these polymers (approximately 3,500 Å thick) increases with increasing length of alkyl group. For example, when the alkyl is C22the durability is four times greater than when the alkyl is C12(polymer film on a 1020 steel substrate). The film durability is strongly substrate dependent, e.g., durability of poly(n-dodecyl methacrylale) is three times greater on glass than on 1020 steel when rubbed with a 440 C rider. The friction and durability are attributed to side chain crystallinity of the polymer. Side chain crystallinity has been observed by others using x-ray and other techniques when the alkyl group is at least 10 or 12 carbons long. Friction measurements may be a more sensitive way of detecting side chain crystallinity. The friction behavior of adsorbed films from solution of the poly(n-alkyl methacrylates) suggests that side chain crystallinity also pertains to suck adsorbed films.Presented as an American Society of Lubrication Engineers paper at the ASME/ASLE International Lubrication Conference held in New York City, October 9–12, 1972