|
1. |
Proceedings of the Society of Public Analysts and other Analytical Chemists |
|
Analyst,
Volume 50,
Issue 586,
1925,
Page 1-1
Preview
|
PDF (53KB)
|
|
摘要:
JANUARY 1925. Vol. L. No. 586. THE ANALYST PROCEEDINGS OF THE SOClETY OF PUBLIC ANALYSTS AND OTHER ANALYTICAL CHEMISTS. AN Ordinary Meeting of the Society was held in the Chemical Society’s Rooms, Burlington House on Wednesday 3rd December 1924. The President Mr. G. Rudd Thompson F.I.C. was in the chair. A certificate was read for the first time in favour of Mr. Thomas Mann. Certificates were read for the second time in favour of:-Messrs. Arthur Chapman Barnes B.Sc. F.I.C. John Jacob Fox D.Sc. (Lond.) F.I.C. Thomas Congalton Hay and Harold Rupert Jensen M.Sc. (Liv.) A.I.C. The following were elected members of the Society :-Messrs. Arthur Cecil Brooks William Donovan Albert George Flower Clifford Hollingsworth George Marshall Norman Charles Edward Sage Percy Frank Spendlove Charles William Spiers Leslie Herbert Trace and James Rawson Walmsley. The following papers were read:-“ The Analytical Value of the Melting Point of the Insoluble Volatile Acids from Fats,” by G. Van B. Gilmour B.Sc. A.I.C., A.R.C.Sc.1. ; “The Use of Mitchell’s Ferrous Tartrate Reagent in Qualitative Analysis,’’ by A. H. Ware; “The Influence of Hydrogen Ion Concentration on the Colorimetric Determination of Pyrogallol and Catechol Derivatives,” by S. Glasstone M.Sc. Ph.L\. F.I.C. ; and “ The Futility of Sealing A Suggestion for its Safeguarding,” by B. S. Evans M.B.E. M.C. B.Sc. F.I.C.
ISSN:0003-2654
DOI:10.1039/AN9255000001
出版商:RSC
年代:1925
数据来源: RSC
|
2. |
Obituary |
|
Analyst,
Volume 50,
Issue 586,
1925,
Page 2-3
Thomas Mann,
Preview
|
PDF (127KB)
|
|
摘要:
ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.
ISSN:0003-2654
DOI:10.1039/AN9255000002
出版商:RSC
年代:1925
数据来源: RSC
|
3. |
On certain new methods for the determination of small quantities of arsenic, and its occurrence in urine and in fish |
|
Analyst,
Volume 50,
Issue 586,
1925,
Page 3-13
H. E. Cox,
Preview
|
PDF (749KB)
|
|
摘要:
ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem.Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ...... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C.of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w.P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust.The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ...... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C.basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C.of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene.w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins .. . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust.The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.
ISSN:0003-2654
DOI:10.1039/AN9255000003
出版商:RSC
年代:1925
数据来源: RSC
|
4. |
An apparatus for the catalytic dehydrogenation of alcohols |
|
Analyst,
Volume 50,
Issue 586,
1925,
Page 13-16
S. G. Willimott,
Preview
|
PDF (273KB)
|
|
摘要:
ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem.Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ...... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.
ISSN:0003-2654
DOI:10.1039/AN9255000013
出版商:RSC
年代:1925
数据来源: RSC
|
5. |
Notes |
|
Analyst,
Volume 50,
Issue 586,
1925,
Page 16-18
John Allan,
Preview
|
PDF (239KB)
|
|
摘要:
ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C.of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem.Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C. of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.
ISSN:0003-2654
DOI:10.1039/AN9255000016
出版商:RSC
年代:1925
数据来源: RSC
|
6. |
Legal notes |
|
Analyst,
Volume 50,
Issue 586,
1925,
Page 19-20
Preview
|
PDF (160KB)
|
|
摘要:
ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.
ISSN:0003-2654
DOI:10.1039/AN9255000019
出版商:RSC
年代:1925
数据来源: RSC
|
7. |
Queensland. Report of the Government Analyst for the year ended June 30, 1924 |
|
Analyst,
Volume 50,
Issue 586,
1925,
Page 20-21
J. B. Henderson,
Preview
|
PDF (119KB)
|
|
摘要:
ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.
ISSN:0003-2654
DOI:10.1039/AN9255000020
出版商:RSC
年代:1925
数据来源: RSC
|
8. |
Government of Palestine. Annual Report of the Department of Health for the year 1923 |
|
Analyst,
Volume 50,
Issue 586,
1925,
Page 22-23
Preview
|
PDF (149KB)
|
|
摘要:
ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.
ISSN:0003-2654
DOI:10.1039/AN9255000022
出版商:RSC
年代:1925
数据来源: RSC
|
9. |
The problem of atmospheric pollution |
|
Analyst,
Volume 50,
Issue 586,
1925,
Page 23-24
Preview
|
PDF (130KB)
|
|
摘要:
ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood. The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather.The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent. of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed.The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed.The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.ORGANIC ANALYSIS 325 Soluble d i d s ... ... ... Non-thmins . . . ... Tannin ... ... . . I I - 1--- Percent. I Per Cent. Per Cent. 2.76 4-77 25-7 1-89 3.63 13.5 0.86 1-15 12.2 Heartwood.The only part of the wood which 4as any possible value as a souroe of tannin is the heartwood; the chief available raw material would be the sawdust. The tannin imparts a dark purplish-brown colour to the outside of hides, but the leather produced might be satisfaotory as a heavy sole leather. The liquor which oolIects an steam-kilning the wood contains from 7 to 10 per cent.of tannin. W. P. S. Estimation of Thiophene. P. E. Spielmann and S. P. Schotz. (J. Soc. Chem. Id., 1919,38,188-189T.)-The authors have examined various met-hods whioh have been suggested for the estimation of thiophene in benzene, and recommend the following modifioations of the basic mercuric sulphate and acetate methods : Basic Mercu/l.ic Szi,&hate Method.-Two C.C.of the benzene and 20 C.C. basic mercuric sulphate solution (sulphuric acid 20 c.c., water 100 ox., and mercuric oxide 5 grms.) axe shaken in a closed tube for three hours; the white precipitate which is formed is collected, washed with hot water, dried at 110" C., and weighed. The weight multiplied by 0.0757 gives the amount of thiophene in 2 C.C. of benzene. Basic Mercuric Acetate Method.---Ten O.C. of the benzene and 4 grms. of baaic mercuric aaetafe (mercuric oxide, 1 part, glacial aceti0 said, 2 parts, the mixture b~iing filtered and the salt washed with ether) are heated on a water-bath under a, reflux condenser for fifteen minutes ; after cooling, the precipitate i8 collected, washed with water, dried at 100" C., and weighed. The weight is multiplied by 0.07516 to obtain the oorresponding amount of thiophene. w. P. s.
ISSN:0003-2654
DOI:10.1039/AN9255000023
出版商:RSC
年代:1925
数据来源: RSC
|
10. |
Food and drugs analysis |
|
Analyst,
Volume 50,
Issue 586,
1925,
Page 25-31
Preview
|
PDF (1327KB)
|
|
摘要:
142 ABSTRACTS OF CHEMICAL PAPERS milk-solids-not-fat and 3.25 per cent. of milk fat, and in the reductase test (see Section 42) shall require at least 4 hours to decolorise the methylene blue solution. Cream must contain at least 40 per cent. of milk fat. (46) Butter.-Butter shall contain at least 80 per cent. of milk fat, and not more than 16 per cent. of water or 20 grains per lb. boron preservative (calculated as boric acid).(47) Cheese.-Cheese shall contain not less than 50 per cent. of milk fat on the dry substance, and skim-milk cheese not less than 10 per cent. (48) Tea.-Tea shall yield between 4 and 7 per cent. of ash (at least one half of which is water-soluble) and at least 30 per cent. of extract, which shall be determined by boiling 2 grms. of tea in 200 C.C. of distilled water under a reflux condenser for 1 hour, filtering hot, cooling and evaporating an aliquot portion to constant weight.Tea dust shall not yield over 5 per cent. of ash insoluble in water. Cofee.-Coffee shall contain not less than 10 per cent. of fat, and more than 1 per cent. of saccharine matter, and shall yield not more than 6 per cent. of ash, of which not less than 75 per cent.shall be soluble in water. Co$ee essence shall contain not less than 0.5 per cent. of caffeine. Cocoa.-Cocoa paste, mass or slab, is the solid or semi-solid mass pro- duced by grinding cocoa nibs, and shall contain not less than 45 per cent. of cocoa fat. The dry fat-free residue shall not contain more than 19 per cent. of natural cocoa starch, 6-33 per cent.of crude fibre, 8 per cent. of total ash, 5-5 per cent. of insoluble ash, and 0.4 per cent. of ferric oxide. Soluble cocoa or cocoa essence must not exceed a maximum of 3 per cent. of added alkali (as K,CO,) , and prepared cocoa must contain at least 20 per cent. of fat-free cocoa. Chocolate $ash, coatings, +owder and confectioners’ chocolate shall contain at least 16 per cent.of fat-free cocoa. No cocoa husks, weighting substance, paraffin wax, or foreign fat may be added to cocoa or to any preparation thereof. (49) (50) D. G. H.142 ABSTRACTS OF CHEMICAL PAPERS milk-solids-not-fat and 3.25 per cent. of milk fat, and in the reductase test (see Section 42) shall require at least 4 hours to decolorise the methylene blue solution. Cream must contain at least 40 per cent.of milk fat. (46) Butter.-Butter shall contain at least 80 per cent. of milk fat, and not more than 16 per cent. of water or 20 grains per lb. boron preservative (calculated as boric acid). (47) Cheese.-Cheese shall contain not less than 50 per cent. of milk fat on the dry substance, and skim-milk cheese not less than 10 per cent. (48) Tea.-Tea shall yield between 4 and 7 per cent.of ash (at least one half of which is water-soluble) and at least 30 per cent. of extract, which shall be determined by boiling 2 grms. of tea in 200 C.C. of distilled water under a reflux condenser for 1 hour, filtering hot, cooling and evaporating an aliquot portion to constant weight. Tea dust shall not yield over 5 per cent. of ash insoluble in water.Cofee.-Coffee shall contain not less than 10 per cent. of fat, and more than 1 per cent. of saccharine matter, and shall yield not more than 6 per cent. of ash, of which not less than 75 per cent. shall be soluble in water. Co$ee essence shall contain not less than 0.5 per cent. of caffeine. Cocoa.-Cocoa paste, mass or slab, is the solid or semi-solid mass pro- duced by grinding cocoa nibs, and shall contain not less than 45 per cent. of cocoa fat.The dry fat-free residue shall not contain more than 19 per cent. of natural cocoa starch, 6-33 per cent. of crude fibre, 8 per cent. of total ash, 5-5 per cent. of insoluble ash, and 0.4 per cent. of ferric oxide. Soluble cocoa or cocoa essence must not exceed a maximum of 3 per cent. of added alkali (as K,CO,) , and prepared cocoa must contain at least 20 per cent.of fat-free cocoa. Chocolate $ash, coatings, +owder and confectioners’ chocolate shall contain at least 16 per cent. of fat-free cocoa. No cocoa husks, weighting substance, paraffin wax, or foreign fat may be added to cocoa or to any preparation thereof. (49) (50) D. G. H.142 ABSTRACTS OF CHEMICAL PAPERS milk-solids-not-fat and 3.25 per cent.of milk fat, and in the reductase test (see Section 42) shall require at least 4 hours to decolorise the methylene blue solution. Cream must contain at least 40 per cent. of milk fat. (46) Butter.-Butter shall contain at least 80 per cent. of milk fat, and not more than 16 per cent. of water or 20 grains per lb. boron preservative (calculated as boric acid).(47) Cheese.-Cheese shall contain not less than 50 per cent. of milk fat on the dry substance, and skim-milk cheese not less than 10 per cent. (48) Tea.-Tea shall yield between 4 and 7 per cent. of ash (at least one half of which is water-soluble) and at least 30 per cent. of extract, which shall be determined by boiling 2 grms. of tea in 200 C.C. of distilled water under a reflux condenser for 1 hour, filtering hot, cooling and evaporating an aliquot portion to constant weight.Tea dust shall not yield over 5 per cent. of ash insoluble in water. Cofee.-Coffee shall contain not less than 10 per cent. of fat, and more than 1 per cent. of saccharine matter, and shall yield not more than 6 per cent. of ash, of which not less than 75 per cent. shall be soluble in water. Co$ee essence shall contain not less than 0.5 per cent.of caffeine. Cocoa.-Cocoa paste, mass or slab, is the solid or semi-solid mass pro- duced by grinding cocoa nibs, and shall contain not less than 45 per cent. of cocoa fat. The dry fat-free residue shall not contain more than 19 per cent. of natural cocoa starch, 6-33 per cent. of crude fibre, 8 per cent. of total ash, 5-5 per cent.of insoluble ash, and 0.4 per cent. of ferric oxide. Soluble cocoa or cocoa essence must not exceed a maximum of 3 per cent. of added alkali (as K,CO,) , and prepared cocoa must contain at least 20 per cent. of fat-free cocoa. Chocolate $ash, coatings, +owder and confectioners’ chocolate shall contain at least 16 per cent. of fat-free cocoa. No cocoa husks, weighting substance, paraffin wax, or foreign fat may be added to cocoa or to any preparation thereof. (49) (50) D.G. H.142 ABSTRACTS OF CHEMICAL PAPERS milk-solids-not-fat and 3.25 per cent. of milk fat, and in the reductase test (see Section 42) shall require at least 4 hours to decolorise the methylene blue solution. Cream must contain at least 40 per cent. of milk fat.(46) Butter.-Butter shall contain at least 80 per cent. of milk fat, and not more than 16 per cent. of water or 20 grains per lb. boron preservative (calculated as boric acid). (47) Cheese.-Cheese shall contain not less than 50 per cent. of milk fat on the dry substance, and skim-milk cheese not less than 10 per cent. (48) Tea.-Tea shall yield between 4 and 7 per cent. of ash (at least one half of which is water-soluble) and at least 30 per cent.of extract, which shall be determined by boiling 2 grms. of tea in 200 C.C. of distilled water under a reflux condenser for 1 hour, filtering hot, cooling and evaporating an aliquot portion to constant weight. Tea dust shall not yield over 5 per cent. of ash insoluble in water. Cofee.-Coffee shall contain not less than 10 per cent.of fat, and more than 1 per cent. of saccharine matter, and shall yield not more than 6 per cent. of ash, of which not less than 75 per cent. shall be soluble in water. Co$ee essence shall contain not less than 0.5 per cent. of caffeine. Cocoa.-Cocoa paste, mass or slab, is the solid or semi-solid mass pro- duced by grinding cocoa nibs, and shall contain not less than 45 per cent.of cocoa fat. The dry fat-free residue shall not contain more than 19 per cent. of natural cocoa starch, 6-33 per cent. of crude fibre, 8 per cent. of total ash, 5-5 per cent. of insoluble ash, and 0.4 per cent. of ferric oxide. Soluble cocoa or cocoa essence must not exceed a maximum of 3 per cent. of added alkali (as K,CO,) , and prepared cocoa must contain at least 20 per cent.of fat-free cocoa. Chocolate $ash, coatings, +owder and confectioners’ chocolate shall contain at least 16 per cent. of fat-free cocoa. No cocoa husks, weighting substance, paraffin wax, or foreign fat may be added to cocoa or to any preparation thereof. (49) (50) D. G. H.142 ABSTRACTS OF CHEMICAL PAPERS milk-solids-not-fat and 3.25 per cent. of milk fat, and in the reductase test (see Section 42) shall require at least 4 hours to decolorise the methylene blue solution.Cream must contain at least 40 per cent. of milk fat. (46) Butter.-Butter shall contain at least 80 per cent. of milk fat, and not more than 16 per cent. of water or 20 grains per lb. boron preservative (calculated as boric acid). (47) Cheese.-Cheese shall contain not less than 50 per cent.of milk fat on the dry substance, and skim-milk cheese not less than 10 per cent. (48) Tea.-Tea shall yield between 4 and 7 per cent. of ash (at least one half of which is water-soluble) and at least 30 per cent. of extract, which shall be determined by boiling 2 grms. of tea in 200 C.C. of distilled water under a reflux condenser for 1 hour, filtering hot, cooling and evaporating an aliquot portion to constant weight.Tea dust shall not yield over 5 per cent. of ash insoluble in water. Cofee.-Coffee shall contain not less than 10 per cent. of fat, and more than 1 per cent. of saccharine matter, and shall yield not more than 6 per cent. of ash, of which not less than 75 per cent. shall be soluble in water. Co$ee essence shall contain not less than 0.5 per cent.of caffeine. Cocoa.-Cocoa paste, mass or slab, is the solid or semi-solid mass pro- duced by grinding cocoa nibs, and shall contain not less than 45 per cent. of cocoa fat. The dry fat-free residue shall not contain more than 19 per cent. of natural cocoa starch, 6-33 per cent. of crude fibre, 8 per cent. of total ash, 5-5 per cent. of insoluble ash, and 0.4 per cent.of ferric oxide. Soluble cocoa or cocoa essence must not exceed a maximum of 3 per cent. of added alkali (as K,CO,) , and prepared cocoa must contain at least 20 per cent. of fat-free cocoa. Chocolate $ash, coatings, +owder and confectioners’ chocolate shall contain at least 16 per cent. of fat-free cocoa. No cocoa husks, weighting substance, paraffin wax, or foreign fat may be added to cocoa or to any preparation thereof.(49) (50) D. G. H.142 ABSTRACTS OF CHEMICAL PAPERS milk-solids-not-fat and 3.25 per cent. of milk fat, and in the reductase test (see Section 42) shall require at least 4 hours to decolorise the methylene blue solution. Cream must contain at least 40 per cent. of milk fat. (46) Butter.-Butter shall contain at least 80 per cent.of milk fat, and not more than 16 per cent. of water or 20 grains per lb. boron preservative (calculated as boric acid). (47) Cheese.-Cheese shall contain not less than 50 per cent. of milk fat on the dry substance, and skim-milk cheese not less than 10 per cent. (48) Tea.-Tea shall yield between 4 and 7 per cent. of ash (at least one half of which is water-soluble) and at least 30 per cent.of extract, which shall be determined by boiling 2 grms. of tea in 200 C.C. of distilled water under a reflux condenser for 1 hour, filtering hot, cooling and evaporating an aliquot portion to constant weight. Tea dust shall not yield over 5 per cent. of ash insoluble in water. Cofee.-Coffee shall contain not less than 10 per cent. of fat, and more than 1 per cent.of saccharine matter, and shall yield not more than 6 per cent. of ash, of which not less than 75 per cent. shall be soluble in water. Co$ee essence shall contain not less than 0.5 per cent. of caffeine. Cocoa.-Cocoa paste, mass or slab, is the solid or semi-solid mass pro- duced by grinding cocoa nibs, and shall contain not less than 45 per cent. of cocoa fat. The dry fat-free residue shall not contain more than 19 per cent.of natural cocoa starch, 6-33 per cent. of crude fibre, 8 per cent. of total ash, 5-5 per cent. of insoluble ash, and 0.4 per cent. of ferric oxide. Soluble cocoa or cocoa essence must not exceed a maximum of 3 per cent. of added alkali (as K,CO,) , and prepared cocoa must contain at least 20 per cent. of fat-free cocoa.Chocolate $ash, coatings, +owder and confectioners’ chocolate shall contain at least 16 per cent. of fat-free cocoa. No cocoa husks, weighting substance, paraffin wax, or foreign fat may be added to cocoa or to any preparation thereof. (49) (50) D. G. H.142 ABSTRACTS OF CHEMICAL PAPERS milk-solids-not-fat and 3.25 per cent. of milk fat, and in the reductase test (see Section 42) shall require at least 4 hours to decolorise the methylene blue solution.Cream must contain at least 40 per cent. of milk fat. (46) Butter.-Butter shall contain at least 80 per cent. of milk fat, and not more than 16 per cent. of water or 20 grains per lb. boron preservative (calculated as boric acid). (47) Cheese.-Cheese shall contain not less than 50 per cent. of milk fat on the dry substance, and skim-milk cheese not less than 10 per cent. (48) Tea.-Tea shall yield between 4 and 7 per cent.of ash (at least one half of which is water-soluble) and at least 30 per cent. of extract, which shall be determined by boiling 2 grms. of tea in 200 C.C. of distilled water under a reflux condenser for 1 hour, filtering hot, cooling and evaporating an aliquot portion to constant weight.Tea dust shall not yield over 5 per cent. of ash insoluble in water. Cofee.-Coffee shall contain not less than 10 per cent. of fat, and more than 1 per cent. of saccharine matter, and shall yield not more than 6 per cent. of ash, of which not less than 75 per cent. shall be soluble in water. Co$ee essence shall contain not less than 0.5 per cent. of caffeine. Cocoa.-Cocoa paste, mass or slab, is the solid or semi-solid mass pro- duced by grinding cocoa nibs, and shall contain not less than 45 per cent. of cocoa fat. The dry fat-free residue shall not contain more than 19 per cent. of natural cocoa starch, 6-33 per cent. of crude fibre, 8 per cent. of total ash, 5-5 per cent. of insoluble ash, and 0.4 per cent. of ferric oxide. Soluble cocoa or cocoa essence must not exceed a maximum of 3 per cent. of added alkali (as K,CO,) , and prepared cocoa must contain at least 20 per cent. of fat-free cocoa. Chocolate $ash, coatings, +owder and confectioners’ chocolate shall contain at least 16 per cent. of fat-free cocoa. No cocoa husks, weighting substance, paraffin wax, or foreign fat may be added to cocoa or to any preparation thereof. (49) (50) D. G. H.
ISSN:0003-2654
DOI:10.1039/AN925500025b
出版商:RSC
年代:1925
数据来源: RSC
|
|