ISSN:0003-2654    

DOI:10.1039/AN94671FP007

出版商:RSC    

年代:1946

数据来源: RSC

ISSN:0003-2654    

DOI:10.1039/AN94671FX009

出版商:RSC    

年代:1946

数据来源: RSC

ISSN:0003-2654    

DOI:10.1039/AN94671BX011

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion.The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp.15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C.Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner.He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions.After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175).Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408.London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent.and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN946710097b

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion.The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100107

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion.The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp.15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C.Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner.He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100111

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion.The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp.15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C.Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner.He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100117

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion.The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp.15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C.Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner.He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100122

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion.The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp.15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C.Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner.He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions.After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175).Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408.London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent.and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100129

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

TECHKIQUE OF SPECTROGRAPHIC ANALYSIS 139 Notes NOTE ON COMMERCIAL PAPAVERINE MANY of the colour reactions attributed to papaverine are due to impurities with which the alkaloid is often contaminated. Of particular interest is the observation of Pictet and Kramers,l who found that pure papaverine gave no colour with cold concentrated sulphuric acid and that the brilliant purple reaction frequently observed was due to cryptopine. The work of these authors has no doubt resulted in the appropriate monographs of the British Pharmaceutical Codex the French Codex and the German Pharma-copoeia stating that the alkaloid and its hydrochloride give no colour with cold sulphuric acid. During the war commercial papaverine yielding no colour with cold sulphuric acid has been almost unobtainable and this led to an investigation in our laboratories of the cryptopine colour reaction.For this purpose some commercial papaverine was first purified by fractional crystallisation of the acid oxa1ate.l The alkaloid recovered from the salt still contained a trace of cryptopine which was finally removed by passing a chloroform solution of the alkaloid through a column of aluminium oxide. In this way papaverine giving no colour with cold sulphuric acid was obtained. Preliminary work with cryptopine showed that 0.01 mg. or less could be detected when treated with 1 nil. of sulphuric acid. By mixing chloroform solutions of papaverine and cryptopine and evaporating to dryness a series of samples of known composition was prepared and 10 mg. of each was treated with 1 ml.of sulphuric acid. It was found that 0.2 per cent. of cryptopine was easily detectable or in other words papaverine which was 99.8% pure gave a colour with cold sulphuric acid. I t would seem that a standard requiring no colour with sulphuric acid although satisfactory for synthetic papaverine is too stringent for the natural product. The National Formulary VII has com-promised by requiring the colour obtained when 50 mg. of papavei-ine hydrochloride are dissolved in 2 ml 140 NOTES of sulphuric acid shall be no more than pale pink. A more satisfactory standard would result however if the colour produced were required to be less than that of a standard prepared from a stated amount of cryp topine. Thebaine gives an orange red colour under the conditions of the test but in our experience the major impurity in natural papaverine is cryptopine.I am indebted to the Directors of The Wellcome Foundation for permission to publish this note. REFERENCE 1. Pictet A. and Kramers G. H. Ber. 1910 43 1329. THE WELLCOME CHEMICAL WORKS DARTFORD G. E. FOSTER December 1945 THE ESTIMATION OF CODEINE IN PRESENCE OF CREOSOTE CODEINE is a common ingredient of mixtures used to alleviate coughing and is invariably incorporated as a salt with substances of a syrupy nature. Creosote is often included on account of its expectorant properties, and this makes the estimation of the alkaloid somewhat tedious. It is thought that a method which has been applied successfully might be of general interest. It is soluble in 120 parts of water in 20 parts of ether and readily in chloroform and the last solvent is employed in its extraction although sometimes a mixture of chloroform and ether is used.The following method has been employed chiefly with viscous liquids. Transfer a known weight of the substance under test to a separator using as little water as possible, and shake with an appropriate volume of 2% sodium hydroxide solution. The main bulk of the creosote, which consists largely of phenolic substances is dissolved by combination with the alkali. Extract the alkaloid with chloroform in successive quantities of 25 ml. 15 ml. 10 ml. and 5 ml. and wash each of the extracts with one and the same quantity of 5 ml. of water. In both these stages vigorous shaking is not only unnecessary but is to be avoided as an emulsion is very liable to be produced thereby.Distil off the chloroform from the combined extracts and treat the residue consisting of codeine and some creosote with N/1 sulphuric acid which forms a soluble salt with the alkaloid and leaves the creosote unchanged; filter. Treat the filtered solution with an excess of N/1 sodium hydroxide and carry out a similar process of extraction ; repeat these operations twice when the codeine should be obtained entirely free from creosote. Dry the final chloroform extract with anhydrous sodium sulphate and filter taking care to wash well with further quantities of chloroform to recover the last traces of alkaloid. Finally dry the residue at 100" C. to constant weight. Good results have been obtained using a vacuum desiccator.Calculate results as anhydrous codeine and check volumetrically by dissolving the weighed residue in a known volume of N/100 sulphuric acid and titrating the excess of acid with N/100 sodium hydroxide, using methyl red as indicator. 1 ml. of 'N/lOO sulphuric acid consumed = 0.0029917 g. of anhydrous codeine. Codeine is not a phenol and is not soluble in alkalies. In an actual experiment a solution in Simple Syrup was prepared containing 0.023% of codeine and 0.130y0 of creosote. 51.37 g. of the sample were treated with 50 ml. of 2% sodium hydroxide solution, and the alkaloid was extracted with chloroform in the manner described above. The alkaloidal residue was treated with N/10 sulphuric acid and filtered and after addition of excess of N/10 sodium hydroxide was re-extracted with chloroform and this process was repeated twice more when the residue obtained on removal of the solvent was apparently free from creosote.The weight of residue obtained was 0.01156 g., equivalent to 0.0225% of anhydrous codeine in the original product. The result by titration of the weighed residue was 0.0224y0. 310 RICHMOND ROAD R. D. CHANDLER EAST TWICKENHAM MIDDLESEX November 1945 THE FLECK AND WARD METHOD OF DETERMINING ELEMENTAL SULPHUR WHILST studying an application of the Fleck and Ward method of determining sulphur,' my attention was drawn to a statement by Donnelly.2 unsupported by experimental evidence that above 15" C. this method gives high results owing to decomposition of the formaldehyde bisulphite compound. Although this is contrary to experience in these laboratories it was considered to warrant investigation.A series of tests were carried out for simplicity on synthetic assay solutions prepared by mixing N/10 sodium thiosulphate solution (25 ml.) and 8% w/v sodium sulphite solution (20 ml.). The solutions were titrated a t the temperatures given in Table I from which it is evident that Donnelly's statement is not confirmed. TABLE I. 24.90 ml. N/10 Iodine 25 ml. N/10 thiosulphate = { 24.95 Temperature of N/10 iodine solution "C. used ml. 17 24.90 18 24-90 23 24.80 25 24.85 26 24.80 27 24-80 32 24.7 NOTES 141 The method directs that after addition of formaldehyde and acetic acid the titration should be carried out “forthwith.” If an assay is allowed t o stand before titration particularly if dilution is deferred a negative error will be obtained as may be seen from Table 11 which gives the results of titrations carried out on aliquot portions from a sulphur determination.TABLE I1 0 36.35 2 35.85 5 34.60 end-point poor One possible error more liable to occur in serial analyses should be mentioned. Time of standing min. N/10 Iodine used ml. 36 30.0 , ,# I wish to thank the directors of Messrs. Cooper McDougall & Robertson for permission t o publish this note. 1. 2. REFERENCES Fleck H. R. and Ward A. M. Quart. J . Pharm. 1934 7 179. Donnelly R. P. Chem. and Ind. 1942 61 114. THE COOPER TECHNICAL BUREAU BERKHAMSTED BERKS. D. A. LAMBIE November 1945 THE DETERMINATION OF CITRATE AND TARTRATE STREBINGER and Wolfram1 described a method depending on iodate oxidation for the determination of tartrate and Pirrone2 gave a modified procedure for the determination of relatively small quantities of citrate and for tartrate.Pirrone’s method was found by Lampitt and Rooke3 to give high results for citrate. We have found that this happens with all three methods; our results obtained with the procedures given in the literature were: Material Method taken g. found g. Recovery yo Quantity Quantity A.R. Citric acid monohydrate* Pirrone 0-0343 0-0361 105.2 Strebinger and Wolfram 0.2437 0-2594 106.4 A.R. Tartaric acid Pirrone 0.0505 0-0584 115.3 Strebinger and Wolfram 0.2988 0.3290 110-1 * The following reaction was assumed: These high results are due to a reaction between the sulphuric acid and the potassium iodate.5C,H80 + 18KI0 + 9H2S04 = 9K,S04 + 3Oc0 + 91 + 29H,O. This was established as follows 0.1 g. of potassium iodate was heated with known quantities of water and 30 ml. of sulphuric acid in a beaker over a moderate Bunsen flame for a known length of time and then treated as in Strebinger and Wolfram’s method. The following results were obtained. Water Time of heating KIO recovery present ml. mins. % 0-5 30 44.6 0.5 10 86.0 15 15” 94.6 15 1st 95.6 Hence it would appear that in a determination of either citrate or tartrate an error not greater than 0.5% is obtained if (1) an excess of about 10% of potassium iodate and not less than 15 ml. of water are used and (2) the time of heating is not greater than 15 mins.The following modification of Strebinger and Wolfram’s method was therefore adopted-To 0.3 g. of tartaric acid or 0-24 g. of citric acid (or the equivalent as tartrate or citrate) add 1 g. of potassium iodate, 15 ml. of water and 30 ml. of concentrated sulphuric acid. Heat over a moderate flame until dense white fumes begin to be evolved (10-15 mins.) and allow to cool. Transfer to a 750 ml. flask containing 200 ml. of water boil until free from iodine cool add 1-2 g. of potassium iodide and titrate with N/10 sodium thiosulphate using chloroform as indicator. * Dense white fumes just produced. on 0-05 g. KIO,. 1 ml. of N/10 Na,S,O = 0.003567 g. of KIO, 1 g. of KIO = 0.3507 g. of C4H606 E 0.2727 g. of C6H80,.H,0 = 0.2493 g. of C6H80,. The following results are typical of those obtained by this method.Material Quantity taken g. Error mg. Recovery % A.R. Citric acid 0.2366 + 1.4 100.6 0.1002 + 0.6 100.6 0.0493 + 1.1 102.3 A.R. Tartaric acid 0-2980 +2*1 100.7 0.1008 + 1.0 101.0 0.0504 + 2.5 105.3 A.R. Sodium citrate 0.3520 - 1.1 99.7 0.3505 0.0 100. 142 NOTES For the smaller quantities of citrate or tartrate quantities of potassium iodate and sulphuric acid in proportion are used. Interfering substances include reducing agents and acetates. Nitric acid or nitrates interfere but the effect is negligible up to 15 ml. of N / 1 0 solution. Halides interfere but can be removed by precipitation with silver in sulphuric acid solution; however somewhat low recoveries varying from 97-9974 are then obtained.This may be due to co-precipitation of silver citrate or tartrate with the halide silver alone having no effect on the estimation. For amounts of halide requiring not more than 15 ml. of N/lO silver solution silver nitrate may be used as the precipitant but for larger amounts of halide ammoniacal silver sulphate is recommended the halide solution being kept a t least 2 N with respect to sulphuric acid. Substances not interfering include ammonium salts phosphates and most metals. Citrates and tartrates may sometimes be separated from interfering substances by a preliminary pre-cipitation as follows-To 15 ml. of solution neutralised to phenolphthalein a small excess of lead nitrate in 5 ml. of water is added the precipitate is filtered off on a No. 41 Whatman paper washed with a small quantity of cold water and transferred back to the original vessel with 15 ml.of water. The estimation is then completed normally except that the precipitated lead sulphate is filtered off on a paper pulp pad before the addition of potassium iodide. Determinations on sodium citrate (0.35 g.) and on sodium tartrate 0.50 g.) by this method gave recoveries of 99.2 and 99.4% respectively. We wish to thank the Managing Director of the International Chemical Co. Ltd, for permission to publish this work. REFERENCES 1. 2. 3. Strebinger R. and Wolfram J. J . Chem. SOC. Abstr. ii/1924 73. Pirrone F. Brit. Chenz. Abstr. 1929 A.836. Lampitt L. H. and Rooke H. S. ANALYST 1936 61 654. P. UNGER H. G. HAYNES October 1945 T H E INTERNATIONAL CHEMICAL CO.LTD. BRAYDON ROAD LONDON N.16 THE CONTROL OF DELIVERY FROM BURETTES JUDGING from trade literature it is apparent that during the last decade considerable improvements have been made in the methods of manufacture and accuracy in calibration of volumetric apparatus in general and of burettes ,in particular. Accordingly it is surprising that possible improvements to the burette stopcock have not attracted more attention. As is only too well known such control as is permitted by an ordinary stopcock functions within a small fraction of a complete rotation so that even the most expert operator occasionally overshoots an end-point. In our attempts to spread the control of flow over a greater angular rotation several possible methods of which two are described below were investigated.OFF CONTROLLED FULL FLOW FLOW Fig. 1. 9 OFF Fig. 2. 0 FULL FLOW CONTROLLED FLOW One method of obtaining an enhanced degree of control is shown in Fig. 1. The plug of the stopcock is replaced by another without a way (z.e. undrilled) but having one end of the key marked by a bead of blue glass. The blind plug is carefully ground into the barrel so that a trace of lubricant permits free rotation. By means of a sharp triangular file a V-shaped groove approximately 1.5 mm. wide is cut to extend halfway round the plug as shown by full lines in Fig. l a . The position of the groove with respect to the key of the plug should be noted and the ends of the groove should register with the ways in the barrel. On inserting the plug into the barrel with the key vertical flow of liquid controlled only by the bore of the jet should occur.Starting a t the end beneath the blue bead on the key the groove is extended a further 90" round the plug initially making an angle of a few degrees with the original direction and then curving further away as shown by broken lines in Fig. la. The shape should be such that when the plug is inserted with the key vertical and blue bead uppermost and then rotated anti-clockwise through 90" (all directions are taken facing the key of the plug) the rate of flow should steadily decrease and finally cease. A projection of the conical surface of the plug is shown in Fig. lb NOTES 143 The mode of action is depicted in Fig. lc. As the plug is rotated clockwise from the “off’ position the effective cross section of the way and hence the flow of liquid increases steadily until the “full flow” position is reached.The control of the flow is thus spread over more than 80’ instead of the usual 10” or so with a stopcock of normal design (vide infra). In this design “full flow’’ takes place through the drilled way in the plug the grooves cut on the conical surface being used in conjunction with the way for fine control only. As before the plug is carefully ground in and one end of the key is marked. One commences The second method makes use of a stopcock with an oblique bore. Two grooves 1 mm. wide are cut on the surface of the plug as shown in Fig. 2a. a t the upper end of the way and extends a little more than half way round; it is cut squarely i.e. in a plane a t right angles to the axis of the plug.The second groove which is cut on the opposite side of the plug to the first starts a t the lower end of the way and extends a little less than half way round. It is cut obliquely as shown by the treble broken lines in Fig. 2a. A projection of the conical surface of the plug is shown in Fig. 2b. The plug is inserted in the “off” position as shown in Fig. 2c. On turning it clockwise through go” normal stopcock action giving “full flow” occurs. If the plug is rotated anti-clockwise from the “off’ position very slow flow commences when the marked end of the key is downwards and increases to “full flow” as the rotation is continued through a further half turn. Alternatively increasing flow with clock-wise rotation may be obtained by altering the positions of the grooves.Of the two methods the second is pre-ferable since a standard stopcock is used the control is spread over about 150” and despite the two grooves cutting is simpler. Curve A, Fig. 3 shows the degree of control obtainable, and should be compared with Curve B ob-tained with a stopcock of normal type. The stopcocks were each provided with a jet and sealed on to a 10-ml. burette to the top of which a funnel device with water feed and overflow was fitted to give a constant head of 32 cm. above the stopcoc,k. The rotations of the plug were measured by a circular protractor affixed to the small end of the plug. The water issuing from the jet was collected over timed intervals and weighed.The scale of Fig. 3 is 10 DEGREES ROTATION FROM ARBITRARY ZERO Fig. 3. too small to illustrate the degree of control obtainable in the range 0 to 30”. in Table I. This is shown by the results TABLE I Rotation Delivery Time per drop, degrees g. per min. min. 1 0.0014 24.0 2.6 0.0019 19.0 5 0-0024 14-2 10 0.0038 11.5 15 0-0079 6.0 20 0.0150 3.0 25 0.0430 1.1 30 0-2600 0.18 In practice the change in shape of curve A in the 30-40’ region due to a slight irregularity in the hand-cut oblique groove in the stopcock plug is of little disadvantage. Machine cutting would largely eliminate such irregularities and exponential or similar rotation-delivery responses could be obtained if desired. Owing to the ease with which the drop speed may be varied it is expected that burettes fitted with a fine-control stopcock will be useful in potentiometric titrati0n.l The stopcock should be generally useful in the control of flow of liquids.It should also have applica-tions in connection with gases and indeed a simpler form of the “nicked” plug is used in Pregl’s micro Dumas apparatus for nitrogen REFERENCES 1. Glasstone S. “The EEectrochemistvy of Solutions,” hlethuen London 1937 p. 390. 2. Pregl F. “Quantitative Organic Microanalysis,” transl. Fyleman p. 104; Belcher R. and Godbert, A. L. “Semi-micro Quaiztdfative Anulysis,” Longmans London 1946 p. 85. HAMMERSMITH LONDON W.6 FULLER’S LTD. J. T. STOCK M. A. FILL November 28th 194 144 NOTES -4 VACUUM-OPERATED CIRCULATING PUMP The pump (Fig. l) which is of the pulsating t y p e l ~ ~ ? ~ was developed for circulating water from a Since the “piston” The It is self-starting and will deliver water at any tem-As the column of When the direction of movement Oscillation of the Side tube E constant-temperature bath through a refractometer or similar jacketted instrument.consists of a column of mercury construction is comparatively simple no close limits being involved. pump is designed to be mounted in the bath itself. perature up to about 97” C. even against considerable back-pressure. The pumping action depends upon the oscillations of the mercury in the U-tube. mercury in limb A descends water is drawn in through foot valve C. of the column is reversed valve C closes and water is delivered by way of head valve D.mercury column is maintained by the automatic build-up and break of vacuum in limb B. is connected to a water pump by way of a safety bottle. I 1 I 56 100 150 011, LENGTH OF I E~~ BORE TUBE H‘ u Fig. 2. a 0 5 A 0 m & . Fig. 1. The valve motion resembles that used in the micro-stirrer previously described.“ Owing however to the much slower strokes due to the inertia of the moving masses of liquid a “hold-off’’ motion has been added to the “impact” principle already developed. Valve rod I; is light and tends to float when the level of mercury in B has risen about 5 mm. above its rest position. Floating is prevented by the atmospheric pressure upon valve G keeping the latter upon its seat. As the mercury continues to rise in B it reaches rubber bumper H suddenly increasing the upward thrust and breaking the vacuum by opening valve G.The buoyancy of the valve rod now exerts itself and it continues to rise although movement of the mercury column may have ceased. The valve rod now floats in the mercury and follows. the latter downwards until valve G closes when the cycle of operations is repeated. By this means long steady strokes are obtained. Valve rod F is of 3-mm. glass rod which is fused into a 5-mm. diameter ball a t the upper end to form valve G. The latter is lightly ground into the upper end of guide J ; both ends of the latter are constricted to a bore of 4 mm. Bumper H is a 10-mm. length of 13-mm. diameter rubber pressure tubing which slides stiffly upon F. Valve units C and D are identical and their construction is shown at (b) in Fig.1. The design allows ready replacement and gives an accurately controlled lift (5 mm.). Water enters guide K through the large oval hole L. The upper ball M is lightly ground into its seating and the ends of K are constricted symmetrically so that the valve stem has a 2-mm. clearance. To introduce the valve units into the chamber N the bore of the latter is lightly smeared with glycerin. The units are then introduced with a screw-like motion and pushed into position as shown in Fig. 1. A piece of tubing such as a blunt corkborer is useful for this purpose. If the rubber sleeves do not fit tightly, a drop of petrol may be applied. Thimble 0 of copper gauze is useful to prevent ingress of foreign particles. Valve rod IT should dip about 20 mm.into the mercury when the latter is a t rest valve G being closed. The distance x from the underside of H to the mercury surface should be about 35 mm. For a given suction the amplitude of the oscillations and hence the delivery of water is roughly proportional to this dimension. Limb A is Details of the vacuum valve assembly are shown enlarged at (a) in Fig. 1. The vacuum valve assembly is fitted and 70 ml. of mercury are placed in the U tube MINISTRY OF FOOD 145 completely filled with water when stopper P is carefully inserted so that air is not entrapped. On applying suction a t E pumping commences. With the greatest suction obtainable from an average water-jet pump fed from a fluctuating main, the output ranges from 200 to 300 ml. per min. as distance x is increased from 5 to 35 mm. The normal rate of action is 80 to 100 strokes per min. With the smallest suction consistent with regular operation, the delivery is from 40 to 200 ml. between the same limits of x. As is shown by the results in Fig. 2 obtained by inserting various lengths of 1.75-mm. bore tubing horizontally in the delivery line the device will deliver against a considerable resistance. (Dimension x was 25 mm. in this case.) It will also raise water a t least 50 cm. above the level of the bath. REFERENCES 1. 2. 3. 4. Levina S. D. Zavodskuya Lab. 1940 9 1048. Rollett A. 2. physik. Chew. 1942 191~ 251. Olson W. T. and Spurr R. A. Ind. Eng. Chem. Anal. Ed. 1943 15 467. Fill M. A. and Stock J. T. ANALYST 1944 69 212. FULLER’S LTD. HAMMERSMITH LOKDON W.G J. T. STOCK M. A. FILL Nouember 26th 1945

ISSN:0003-2654    

DOI:10.1039/AN9467100139

出版商:RSC    

年代:1946

数据来源: RSC