ISSN:0003-2654    

DOI:10.1039/AN94671FP013

出版商:RSC    

年代:1946

数据来源: RSC

ISSN:0003-2654    

DOI:10.1039/AN94671FX017

出版商:RSC    

年代:1946

数据来源: RSC

ISSN:0003-2654    

DOI:10.1039/AN94671BX019

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100201

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100202

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion.The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp.15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100203

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion.The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100207

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years.The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion.The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on.Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp.15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C.Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner.He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice.Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100210

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

SCHOELLER AND HOLNESS THE GRAVIMETRLC DETERMINATION OF TIN 217 The Gravimetric Determination of Tin in Alloys by the Tannin Method BY W. R. SCHOELLER AND H. HOLNESS IN a recent paper1-the third on the subject of further analytical applkations of tannin-we have advocated the use of the reagent for the gravimetric determination of tin and its separation from a number of metals having satisfied ourselves that the tin-tannin complex is a much more tractable precipitate than either metastannic acid or stannic sulphide and is free from occlusions after one precipitation at the correct acidity. Our test analyses were conducted on pure solutions of known metal content. We have now elaborated and tested methods for the determination of tin in the following alloys white metal (lead base) ,brass, bronze and zinc-base die-casting alloy.For the first three we have used the standardised alloys supplied by the Bureau of Analysed Samples Ltd. (Messrs. Ridsdale & Co.). Before proceeding to describe the new methods we may usefully explain their common features vzz. the elimination of antimony if present and our perfected procedure for securing acidity control of the solution during tannin precipitation. This improved technique simplifies the assay and makes it unnecessary to test the tannin filtrate for complete precipitation. SEPARATION OF TIN FROM ANTIMONY-In the determination of tin in alloys by the tannin method antimony is the most likely interfering element. It is co-precipitated to a A 218 SCHOELLER AND HOLNESS THE GRAVIMETRIC DETERMINATION OF certain extent from either chloride or oxalate solution and although some antimony volatilises during ignition of the tannin precipitate the tin results nevertheless always show a sub-stantial positive error.Fortunately such contamination of the ignited staiinic oxide (which is white when pure) is detected with certainty by its greyish-blue to dark blue tint.2 In order not to complicate the tin assay of alloys containing several metals of the hydrogen sulphide group we decided to avoid the separation methods based on the precipitation of antimony sulphide from ~ x a l i c ~ hydrofluoric,* phosphoric5 or 4 N hydrochloric acid6 solution. This led us to adopt metallic precipitation of the antimony and in our early test analyses of the white metal (C) we used very fine soft iron wire for that purpose.Some of our results were fairly close but others were definitely low and in every determination the ignited stannic oxide was slightly discoloured. It became evident that a small variable amount of tin was being co-precipitated with the antimony and the latter was proved to re-dissolve to a small extent during the washing on the filter. By a compensation of errors of opposite sign seemingly accurate results were obtained in some of the tests. These observations confirmed the conclusions of Jarvinen’s careful study of the separation of tin from antimony by reduced iron.’ We then investigated the action of nickel shown by Evans and Higgs* not to induce co-precipitation of tin with antimony or copper. The result was very satis-factory the tin figures becoming concordant and the white colour of the ignited stannic oxide proving its freedom from antimony.Evans and Higgs’s investigation appears to us to be an important contribution to the analytical chemistry of tin and to establish the superiority of nickel Over other metals used as reducing agents in the volumetric iodine method. B. ACIDITY CONTROL DURING TANNIN PRECIPITATION-The vital adjustment of acidity required for quantitative tannin separations is obviously very much simplified if the initial acidity of the solution is accurately known. Such is not the case when the solution to be precipitated has been obtained by an acid attack of the assay material a large excess of acid being normally used and an indefinite fraction of this eliminated by evaporation.The optimum acidity must then be approached with care and complete precipitation ascer-tained by testing the filtrate from the tannin precipitate. Since in rapid and serial routine work it is highly desirable to be able to dispense with such tests we have been at pains to work out a procedure in which the acidity is under complete control the tin is first recovered from the solution of the alloy in the form of an ammonia or “basic acetate” precipitate. This need not be pure-in fact the presence of iron is desirable and we add it if necessary. I t acts as a sensitive indicator and thus provides an additional safeguard against accidental over-neutralisation which will cause discoloration of the white tin-tannin complex. Procedure-Wash the ammonia or basic acetate precipitate a few times with water and return it to the 600-ml.precipitation beaker provided with a mark a t the 250-ml. level. Dissolve the precipitate in a boiling-hot solution of 3-5 g. of ammonium oxalate in 50 ml. of N hydrochloric acid which is poured through the filter. Thoroughly wash the filter with hot water and reserve it. The beaker now contains the whole of the tin in an oxalate solution of known acidity. Dilute the solution with 25 ml. of saturated ammonium chloride solution and hot water to about 200 ml. heat to boiling and add 1 g. of tannin dissolved in a little hot water. Stir the boiling solution while adding 3540 ml. of N ammonia previously stan-dardised against the N acid and adjust the volume to 250 ml. This results in a final acidity of 0.06 to 0.04 N at which the tin precipitation is complete.The approach towards neutrality is indicated by the more gradual disappearance of the dark colour of the iron-tannin complex upon agitation; permanent discoloration of the precipitate must be avoided and does not take place if the above directions are followed. Allow the precipitate to settle collect it in the reserved filter containing a little filter pulp wash with 2% ammonium nitrate solution until free from chloride and ignite to SnO in a tared porcelain crucible. The oxide should be white without any bluish-grey tinge. WHITE METAL (LEAD BASE “A”)-The standard sample was certified to contain Pb 82.6 Sb 12.04 and Sn 4.64y0 totalling 99-28y0. The sequence of operations is as follows: solution in brominated hydrochloric acid (1+1) ; precipitation of the antimony with nickel; recovery of the tin from the filtrate by basic acetate precipitation and treatment of the precipitate as under B.Lead and nickel which would interfere in the precipitation of the tin on account of the sparing solubility of their oxalates are eliminated as soluble acetates. Procedure-Dissolve 0.5 g. in 50 ml. of diluted hydrochloric acid (1 + 1) saturated with bromine; boil off excess bromine and dilute to 150 ml. Boil gently for 3 hour with 1 g. of nickel powder filter hot through a pad of filter pulp sprinkled with nickel and wash with hot C TIN I? ALLOYS BY THE TANNIN METHOD 219 N hydrochloric acid. To the boiling filtrate add 20 ml. of bromine water (or 5 ml. of conc. nitric acid) 10 g.of ammonium acetate and diluted ammonia (13.1) until most of the acid is neutralised; this is indicated by the irxipient colour change from green to pale blue of the dissolved nickel salt. Restore the green colour if necessary with a minimum of acid Allow the precipitate to flocculate in the hot solution collect it on an 11 cm. No. 41 Whatman filter, wash a iew times with hot water and proceed as under B. Found Sn 4-71 4.78 4.71 4.67%. We believe the true tin content of this alloy to he slightly higher than 4.7%. The certified figure 4-64y0 is the average of ten determinations by a variety of methods. The highest and lowest figures are 4.94% and 4.16% respectively and the probable error of the mean is I ~ O - O ~ Y ~ . D. Bmss-The certified figures for this alloy (“hlanganese brass B”) include Cu 58.8, Zn 33-9 Sn 1-75 Fe 0.91 and Sb 0.05% (total 95-40/).The time-honoured method for the determination of the small qiiantities of tin in brass consists in nitric acid attack and ignition of the insoluble residue which is weighed as SnO,. The method is subject to more or less serious errors which may be either positive (occlusion of the oxides of other metals) or negative (presence of more than about 0.5% of iron which interferes with the complete recovery of the metastannic acidQ). For the accurate and rapid determination of tin in brass the method given below is probably unrivalled. I€ the brass is free from or very low in antimony a determination can be made within 34 hours. Procedure-Dissolve 1 g. of sample together with about 0.05 g.of pure iron (6 inches of iron wire) in 10ml. of aqua regia in a 600-ml. beaker. Dilute to 200ml. add 25ml. of saturated ammonium chloride solution and precipitate the hot solution with excess of ammonia. Collect the precipitate on an 11 cm. No. 41 Whatman filter wash to remove most of the copper and proceed as under B. In three of our test analyses (all on 1 g. of brass) we added known amounts of AnalaR tin. The amount added was deducted from the total tin found. Tin added Total SnO found Equivalent to tin Tin in brass g. €5 g. % none 0.0222 0.0176 1-75 , 0-0222 0.0176 1-75 0.0150 0-0413 0.0325 - 0.01 50= 0.0175 1-75 0.0247 0.0540 0.0425-0*0247 =0*0178 1.78 0.0431 0.0771 0.0607 - 0.0431 =0*0176 1.76 The results are in excellent agreement and confirm the certified figure 1.75%.E. BRONZE “A”-The standard alloy is declared to contain Cu 85.5 Sn 9-96 Pb 1-83, When assayed for tin by the preceding method the results The method Procedwre-Dissolve 0.5 g. of a h y and 0.05 g. of iron in q u a rtgzk ;rnd precipitate with Collect the precipitate wash it free from most of the copper and Reduce the P 0.25 Sb 0.24 and Fe o-07y0. were high (10.15 and 10.2@y0) and the ignited stannic oxide was slate-grey. was therefore modified to include nickel reduction the procedure being as follows. ammonia as under D. dissolve the washed precipitate in 50 ml. of diluted hydrochloric acid (I + 1). solution with nickel powder and proceed as under C. Found Sn 9.71 9.80 9-69 9.69 9.71%. We believe the certified figure 9-96% to be somewhat high the ten analyses of which it is the average includingJive results exceeding 10%.The highest and lowest results given arc 10.lO~o and 9-70y0 respectively. ZINC-BASE DIE-CASTING ALLOY-The accurate determination of tin in this type of alloy (containing about 4% of aluminium with or without copper) is of very great practical importance since minute amounts of tin (more than O ~ O O 1 ~ o ) are now known to produce most serious effects such as inter-crystalline corrosion and gradual disintegration of the alloy. I n actual practice the tin is detected spectrographically but no chemical method for its accurate determination appears to be available. Neither the direct volumetric determination nor gravimetric methods necessarily involving the separation of a trace of tin from large quantities of zinc aluminium and probably copper have given trustworthy results.We are satisfied that the simple tannin procedure given below offers a completely satisfactory solution of the problem. Procedure-Cautiously dissolve 100 g. of the alloy in 700 ml. of diluted hydrochloric acid fl-tl) in a 2-litre beaker. adding the acid in small Dortions at first. When attacked. add F 220 SCHOELLER AND HOLNESS THE GRAVIMETRIC DETERMINATION OF TIN bromine water or a little nitric acid to the hot liquid if copper is present to complete solution; boil off bromine or nitrous fumes. Dilute to 1000 ml. and add 25 ml. of saturated ammonium chloride solution followed by 1 g. of tannin dissolved in a little hot water. Stir the boiling-hot solution and add 2 N ammonia slowly and with stirring until partial precipitation of the aluminium-tannin complex takes place (about 200 ml.are required). Digest to flocculate. Precipitate as much aluminium as can be easily accommodated on an 11 cm. No. 41 filter; it is better to add a slight excess of ammonia and adjust the quantity of precipitate by careful addition of AT hydrochloric acid than to be over-cautious in the addition of the ammonia. Filter hot and wash with 2% ammonium chloride soln. Dissolve 5 g. of ammonium oxalate in 100ml. of N hydrochloric acid in the 2-litre beaker and pour the hot solution on to the tannin precipitate on the filter collecting the filtrate and washes (hot 2% ammonium chloride solution) in a 600-ml. beaker. Any specks of dirt or other insoluble particles present in the sample will be retained by the filter.To the hot filtrate (about 300 mi.) add 25 ml. of saturated ammonium chloride solution and 5 drops of 10% ferric chloride solution. Should any zinc oxalate crystallise out it will redissolve during the subsequent reduction of the acidity. Stir the boiling solution add 0-5 g. of tannin dissolved in 10 ml. of hot water and N ammonia (75-80ml.) until the discoloration due to iron fades rather slowly. Set aside to flocculate on a hot plate and leave overnight at room temperature. Collect the precipitate on a 9 cm. No. 41 filter wash it with 2y0 ammonium nitrate solution containing a few drops of nitric acid ignite in a tared porcelain crucible and weigh as SnO,. Our test determinations were conducted on 100-g.portions of alloy spectroscopically free from tin to which the quantities of tin shown in column 1 of the table were added. Tin added SnO found Equivalent to tin g. g- €5 0-0004 0.0006 0.00047 0~0009 0.0013 0.00 102 0.0013 0.0018 0.00 14 1 0.0021 0.0026 0.00205 0-0039 0.0049 0*00386 0.0044 0-0056 0.00441 A sample of alloy containing tin was tested with the following results (100 g. samples Tin added SnO found Tin in alloy g. g. % none 0.0040 0.00315 0.0040 0.00315 taken) : 0.6bl9 0.0065 0*00512-0~0019 =0.00322 Such effortless complete extraction of minute quantities of tin from 100 g. of alloy proves the above procedure to be a precision method which moreover utilises the simplest apparatus and ordinary reagents and renders the use of the costly spectrograph unnecessary.SUMMARY-Rapid and reliable assay methods are given for the gravimentric deter-mination of tin in white metal (lead base) brass bronze and zinc-base die-casting alloy. A procedure is described by means of which the optimum acidity for the quantitative separation and precipitation of tin by tannin is secured with certainty and ease no test for complete precipitation being required. We thank the Governors Principal and Head of the Science Department of the South West Essex Technical College for permission to carry out this investigation. REFERENCES 1. 2. 3. 4. 5. 6. 7. 8. 9. S.W. Holness H. and Schoeller W. R. ANALYST 1946 71 70. Dunbar-Poole A. G. Id. 1939 64 870. Clarke F. W. Chem. News 1870 21 124. Fischer F. and Thiele K. 2. anorg. Chem. 1910 67 302. Vortmann G. and Metzl A. Z . anal. Chem. 1905 44 525. Panajotow G. Ber. 1909 42 1296. Jiirvinen K. K. Z . anal. C h e m 1923 62 184. Evans B. S. and Higgs D. G. ANALYST 1944,69 291. Meyer A. Chem. Zed. 1922 6 209. ESSEX TECHNICAL COLLEGE WALTHAMSTOW LONDON E. 17 March 194

ISSN:0003-2654    

DOI:10.1039/AN9467100217

出版商:RSC    

年代:1946

数据来源: RSC

摘要:

426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents.It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate.There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE. By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international.The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr. Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively.Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies. Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited.The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time. The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation.Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction426 REVIEWS INKS : THEIR COMPOSITION AND MANUFACTURE.By C. AINSWORTH MITCHELL, D.Sc., F.I.C. Fourth Edition. Pp. xi + 408. London: Charles Grihn tt Co., Ltd. 1937. Price 12s. 6d. net. This, the fourth edition of the standard and, indeed, so far as the reviewer’s knowledge goes, the only text-book on the subject in the language, bridges L gap of 13 years. The author, pre-eminent in his particular sphere, needs little more introduction to the world of technical industry than he does in his official capicity to readers of THE ANALYST, while his reputation in forensic science in all that appertains to handwriting is international. The chemistry of ink, difficult as it is and at times not a little obscure, hcl- riot developed markedly in the interval since 1924; but what progress has been made is covered by Dr.Mitchell in this edition in a very thorough manner. He has found it necessary to enlarge his work to the extent of some 20 per cent. and, in addition, to rewrite a large portion. The arrangement of the book follows the lines of previous editions. After a comprehensive historical introduction, the work is divided into three sections dealing with writing inks, printing inks, and inks for miscellaneous purposes, respectively. Under Section 1 are considered the chemical nature and treatment of the various raw materials used for writing inks from lcmp black to galls, the composition of finished iron-gall, logwood, vanadium, aniline black, and coloured inks, as well as a comprehensive scheme €or the tech~ical examination of inks, handwriting specimens and the identification of forge:-ies.Section 2 deals with the manufacture and examination of printing inks. ,tnd Section 3 with the miscellaneous materials entering into the compositilxx of copying, marking, safety, sympathetic, typewriter inks and so on. Amongst new matter may be noted references to the use of lignone sulphni--,ites in connection with writing ink, a scheme for the identification of individual con- stituents in inks in the form of writing, and the application of filtered ultra-.& if )let light and of infra-red photography in the elucidation of those problems to which such methods are suited. The British Government Standard Specificatior:s for Writing Inks, revised in 1928, are included for the first time.The avaihble evidence upon the constitution of gallotannin is brought up to date and <tbly reviewed, and there is a Comprehensive list of British patents. It is as difficult to withhold admiration of the encyclopaedic scope cjf the matter and references in this book as it is of the erudition and industry displiiyed in its compilation. Practically nothing that comes to mind has escaped atterition, and it is with rather impish glee that the reviewer, after careful search, asserts that he finds no specific reference to the type of alkaline (ammoniacal) gallotannate- iron ink, said t o find favour in the United States, although the di-ammonium hydroxyferrigallate compound of Silbermann and Ozorovitz receives notice. Nor is there mention of that class of quick-drying writing fluids which depend for their efficiency upon partial destruction of the paper sizing by caustic alk 1.5 or sodium silicate. There is no evidence that lignone sulphonate inks have proved se-rious competitors to iron-gall writing inks (pp. 15 and 175). Apart from the unkttmwn quantity of permanence, the principal failing of this type lies in their liability to contain traces of free sulphurous acid to which suspicion attaches in connt-ction

ISSN:0003-2654    

DOI:10.1039/AN9467100221

出版商:RSC    

年代:1946

数据来源: RSC